www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

Dougs Boat Top Shop in Tacoma?
https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=3529
Page 1 of 1

Author:  Optimus Prime [ Mon May 18, 2009 11:50 am ]
Post subject:  Dougs Boat Top Shop in Tacoma?

Does anyone have experience with Doug?

My dealer owes me some canvas work and he's sending it out to Doug. I talked with Doug late last week and he seems knowledgeable and willing to let me have some input. His track record says he's been in the business and has done a lot of boats and other uphosltery work since 1976.

Thanks!

Author:  cougarcruiser [ Mon May 18, 2009 12:49 pm ]
Post subject:  Re: Dougs Boat Top Shop in Tacoma?

I hear a story brewing....

What happened?

I haven't ever heard of them.... Could be a good thing... Could be a ???

Author:  Optimus Prime [ Mon May 18, 2009 1:05 pm ]
Post subject:  Re: Dougs Boat Top Shop in Tacoma?

Yeah, it's a "story". Weird one and I can't figure out who's got it right. Boat goes into Doug's on the 28th and he'll be done 6/3. Remember delivery to me was supposed to be 4/28...

Author:  slman [ Mon May 18, 2009 3:27 pm ]
Post subject:  Re: Dougs Boat Top Shop in Tacoma?

Weird story? When dealing with boats? No way :lol:

Author:  Optimus Prime [ Fri May 29, 2009 2:55 pm ]
Post subject:  Re: Dougs Boat Top Shop in Tacoma?

So, I visited Doug in Tacoma. Good guy, seems like he'll do an excellent job as he is truly interested in my input on the canvas layout. Apparently he does a lot of high end boats as well as Bayliners, etc. So he knows what quality of goods match the boat brand. He will be done next Wednesday...so we'll see the final result.

Author:  Flying Sushi [ Fri May 29, 2009 3:01 pm ]
Post subject:  Re: Dougs Boat Top Shop in Tacoma?

I am just curious…. What are you asking them to do? Would you mind to share?

Author:  Optimus Prime [ Sat May 30, 2009 11:45 am ]
Post subject:  Re: Dougs Boat Top Shop in Tacoma?

Oh yeah, great question....
Custom camper canvas. My boat has a tower so the stock Four Winns camper canvas won't fit. I'll post pics when is done.

-Optimus Prime-

Author:  Optimus Prime [ Fri Jun 19, 2009 10:59 am ]
Post subject:  Re: Dougs Boat Top Shop in Tacoma?

Ok, I got all my work done by Doug. Wow, he truly put the effort into the project and did a very nice design. With all the stitching, custom work,e tc. I am very pleased and would recommmend him in a heartbeat. Doug listens very well and adds his expertise and experience in where needed. Now, what did I have done?

Basically, full canvas for the cockpit. Since I have the factory tower on my boat the factory canvas doesn't fit. Here is what I have:

- Forward (of the arch/tower) bimini
- Rear (of the arch/towmer) bimini
- Windshield connector with zip up door for access to the bow
- Two side curtains on each side
- Sloping (the only design that would work) rear canvas with another zip up door that matches the walk through on my transom.
- And, of course, boots for the bimini tops when they are rolled up on the stainless poles/hardware.

He also modified the stock cockpit cover to allow for the new hardware to fit through the covers.

I forgot to take pictueres last time I was at the boat...so I will try to do so this weekend and post the canvas work in this thread.

Cheers,

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/