| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| New member with 1990 horizon 20' 5.8 omc cobra https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=3567 |
Page 1 of 1 |
| Author: | Firingo [ Fri May 22, 2009 4:12 pm ] |
| Post subject: | New member with 1990 horizon 20' 5.8 omc cobra |
Hi. I bouth this boat for $1000.00 the boat is in goog shape, but i don't have the box for cover the motor, I make a box with the marine playwood. this is good ?? where i can buy the original box for cover the motor ?? Thank you. |
|
| Author: | yrless11 [ Fri May 22, 2009 4:25 pm ] |
| Post subject: | Re: New member with 1990 horizon 20' 5.8 omc cobra |
Welcome! You can certainly make an engine cover out of green treated ply and then upholster it. It's not likely that you'll be able to purchase one, but call your local fourwinns dealer or winnesquam marine (they are well respected and part of this forum, just do a search). Otherwise, maybe see if you can find someone that is parting out a similar boat that you can buy a used one (craigslist, ebay, local boat salvage yards?). |
|
| Author: | Busacharger [ Fri May 22, 2009 6:31 pm ] |
| Post subject: | Re: New member with 1990 horizon 20' 5.8 omc cobra |
Welcome. Try building the box your self and use marine grade wood and hardware. If you have much carpentry skill it should be pretty straight forward to do. Try to find the same boat locally and ask the owner if you could use it to make patterns from. Good Luck! |
|
| Author: | Firingo [ Fri May 22, 2009 6:53 pm ] |
| Post subject: | Re: New member with 1990 horizon 20' 5.8 omc cobra |
Thank you. Yes I make the cober with marine wood. Inside the box i need to put fiber glass to protect from the heat ?? |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|