| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Cup Holders on the 230 https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=394 |
Page 1 of 1 |
| Author: | saopm [ Sat Sep 02, 2006 5:44 pm ] |
| Post subject: | Cup Holders on the 230 |
Washing the boat yesterday I noticed I had cup holders full of water. They seem to be sealed to the boat so I don't think they were made to be removed. So the question is: 
Why are there no drain holes in the cup holders on the 230, and should I drill some? |
|
| Author: | Midlife Crisis [ Sat Sep 02, 2006 8:42 pm ] |
| Post subject: | |
Do a quick search. I think this has already been talked about. |
|
| Author: | ifourwinns [ Sat Sep 02, 2006 11:52 pm ] |
| Post subject: | |
http://www.ifourwinns.com/forum/viewtop ... up+holders |
|
| Author: | trhardy1 [ Tue Sep 05, 2006 8:20 am ] |
| Post subject: | |
I have an o6 210H and had the same issue. I drilled some 3/8 holes (2 in each) in each cup holder. My dealer told me it would go straight into the bilge. I am not sure why FW missed this since there is no way to get the water out, and it can get pretty messy in there. |
|
| Author: | Midlife Crisis [ Tue Sep 05, 2006 9:47 am ] |
| Post subject: | |
On ours they are hard but we managed to get them out. So I took a power drill and filed them down on the edges so they can come out easier. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|