www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

Identify part
https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=4127		 Page 1 of 1
Author:  PDACPA [ Tue Jul 21, 2009 9:16 am ]
Post subject:  Identify part
Does anyone know what this part is for? Guy who sold me the boat had it in the paperwork bag and I found it on the Four Winns Parts (something in the bow).

http://www.fourwinns.net/partbook/basem ... l=180F-A03

Thanks
Author:  DaleG [ Tue Jul 21, 2009 10:53 am ]
Post subject:  Re: Identify part
HHmmm -- looks like the whole boat to me -- my guess is that your link didn't come through correct?
can you be more specific about the part?
Author:  Jim_R [ Tue Jul 21, 2009 12:40 pm ]
Post subject:  Re: Identify part
That must have been one huge paperwork bag! :lol:
Author:  aguyindallas [ Tue Jul 21, 2009 12:42 pm ]
Post subject:  Re: Identify part
Did the bag come with a trailer?
Author:  PDACPA [ Tue Jul 21, 2009 1:33 pm ]
Post subject:  Re: Identify part
Funny guys! IE did not post it right. Here is the text:

180 FREEDOM STANDARD 2003

P/L HRX BOW AREA 96

BLOCK, 4X1 PLASTIC #SC-BKP-SR

Looks like a black rectangle with some screw holes and had two screws with it.
Author:  nhprinter [ Tue Jul 21, 2009 1:58 pm ]
Post subject:  Re: Identify part
Maybe something to do with the bow fill-in cushions?? A mounting block or such? :roll:
Author:  Jim_R [ Tue Jul 21, 2009 5:40 pm ]
Post subject:  Re: Identify part
Yeah, it does appear to be some kind of support block. As it's in the section relating to the bow, I'd guess it's a support for seating. If it is a support for the fill in cushions, I'd imagine that it would mount to the back of the fill in cushions, as the pole supports are white to match the fiberglass that they mount to. I'd poke around in the bow, looking under cushions, or in storage areas to see if you can't find one that matches. I'm thinking the previous owner noticed one was missing, and so the dealer gave him one, and neither of them got around to installing it.
Author:  makoshako [ Tue Jul 21, 2009 5:58 pm ]
Post subject:  Re: Identify part
Call FourWinns or a dealer. No guarantees ... I have heard FourWinns is down to 3-4 people working parts and my experience with my dealer has so far been less than perfect with parts ...even warranty stuff.
Author:  Busacharger [ Fri Jul 24, 2009 9:54 pm ]
Post subject:  Re: Identify part
Look at the underside of your seat bottom cushion and see if it matches the location block that hold the cushions in place.
Author:  The Kid [ Thu Jul 30, 2009 10:03 am ]
Post subject:  Re: Identify part
Yes that block goes under the fill in cushion and rest against the stainless bar that goes across the bow so the cushion doesn't "slip out"
Author:  PDACPA [ Thu Jul 30, 2009 3:45 pm ]
Post subject:  Re: Identify part
Thanks guys. Yes I have them on all the seats that remove. It must be an extra.
Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/