www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Wed May 14, 2025 11:27 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Oil Change 1999 220H
PostPosted: Thu Aug 27, 2009 6:09 pm 
Offline
Seahorse

Joined: Fri Aug 21, 2009 10:23 am
Posts: 22
Please tell me the amount of oil needed to refil a volvo 5.7 engine with G.M. block I believe that would be a 350 260 hp. and is the oil checked hot or cold, first notch or second on dip stick. I put 4qts in engine and 1qt in new filter, ran engine about 3-5 minutes checked oil after about 5-10 minutes and level was up to the first notch on dip stick and on the other side of dipstick it was half way between 1st notch and second notch. can some one please tell me thee propper way to check, and general amount needed for oil change.


Top
 Profile  
 
 Post subject: Re: Oil Change 1999 220H
PostPosted: Thu Aug 27, 2009 6:17 pm 
Offline
email admin your custom rank

Joined: Sun Apr 19, 2009 11:14 am
Posts: 213
I'm not sure about the quantity but I am sure a merc per the manual needs to be checked when the boat is resting in the water. It makes about a 1/2 quart difference on a merc.


Top
 Profile  
 
 Post subject: Re: Oil Change 1999 220H
PostPosted: Thu Aug 27, 2009 7:06 pm 
Offline
email admin your custom rank

Joined: Thu May 18, 2006 6:01 pm
Posts: 216
Location: Ohio
According to my Clymer manual the 5.6 GL is 5 qts with filter and the 5.7Gi,GS,and GSi is 6 qts with filter.



How much oil did you get out?


Top
 Profile  
 
 Post subject: Re: Oil Change 1999 220H
PostPosted: Fri Aug 28, 2009 9:05 am 
Offline
Seahorse

Joined: Fri Aug 21, 2009 10:23 am
Posts: 22
I got a little over 5 and 1/2 qts. of oil out, this tells me it is 6 qt. cap. when completely empty. Is it normal for about a half qt. to remain in the pan. I used an electric pump that was used 2 times to drain the hot tub it has been sitting on a shelf 3 yrs. bought a short hose added hose fittings and hooked to dip stick and it worked fast. but dont know if 1/2 qt. or little less in pan is normal. Thanks again to everyone who has helped me, greatly appreciated.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 23 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group