| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| VDO gauge cluster https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=4807 |
Page 1 of 1 |
| Author: | moe foe [ Wed Nov 11, 2009 7:21 pm ] |
| Post subject: | VDO gauge cluster |
sent the cluster out for repairs, and company added a dedicated ground wire to the cluster. Company instructions say to run dedicated ground wire streight to the engine block or negative post on battery. instructions say to delete old ground wire from the connection between the cluster and fuse panel but they do not tell you which ground wire on the plug to remove. harness connector plug that connects to the gauge cluster has three or four ground wires connected into one or two ground wires do not know which one to delete checked on VDO's website, checked on CDI's website, both have instructions and do not tell you which ground wire to delete. Please help |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|