www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
Annual service time - what to do? https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=6291 |
Page 1 of 1 |
Author: | SeriousRob [ Mon Aug 02, 2010 12:17 pm ] |
Post subject: | Annual service time - what to do? |
Hi all, I just returned from a 3 week vacation in Maine. My 2001 Horizon 180 (5.0 Volvo/Penta) ran great the whole time. ![]() Last year I did all of the rountine service myself; engine oil and filter change, cap and rotor, fuel filter, coil, plugs, lubing of cables, and outboard oil. All of this was fairly easy. This year I will do the same but was wondering if there is more I should look into. If there is more, how much work is involved and can I do it myself? I am very good with the inboard engine work but have never pulled an outdrive or worked on one. I have the SELOC manual as well. Thanks for any help provided. Rob |
Author: | M3eater [ Tue Aug 03, 2010 1:04 pm ] |
Post subject: | Re: Annual service time - what to do? |
I would just add lubing the gimbal bearing and u-joints, which does require removal of the drive. It's not all that difficult. You can build a jig (or rack) to hold the drive as you pull it off. I built one from lumber and used my floor jack under it. Others here have done similar. The manual will guide you through the general process. |
Author: | Matt2000horizon180 [ Tue Aug 03, 2010 2:14 pm ] |
Post subject: | Re: Annual service time - what to do? |
Hey Rob.. I did a little more my first year as I need to replace bellows since they had a tear. This post has too much detail but may give some tips....I just posted my own notes. viewtopic.php?f=3&t=2523&start=0&st=0&sk=t&sd=a |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |