| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| 1996 Horizon 170 F/S https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=7288 |
Page 1 of 1 |
| Author: | pokman [ Sun Apr 10, 2011 8:29 am ] |
| Post subject: | 1996 Horizon 170 F/S |
Hi guys I am a new guy here and I am close to pulling the trigger on a 96 170 Horizon fish and ski with a 96 115 evinrude on it. Just wondering if anyone on the site runs a similiar boat and what kind of performance I can expect out of the motor. I looked at the boat twice and really like it and as soon as the ice melts here is WI I will be taking it for a test drive. Any info appreciated. |
|
| Author: | RotaryRacer [ Sun Apr 10, 2011 1:42 pm ] |
| Post subject: | Re: 1996 Horizon 170 F/S |
Hi pokman. Welcome to this forum. If I'm not mistaken our paths have crossed over on iboats. Make sure you check the boat out thoroughly. I have seen boats from that generation with rotten floors. I haven't actually run that generation of Four Winns, however, I would guess that that 115 would be plenty of power and would probably give a top speed in the mid 40s. That generation of boats was pretty light. |
|
| Author: | pokman [ Sun Apr 10, 2011 2:17 pm ] |
| Post subject: | Re: 1996 Horizon 170 F/S |
Rotaryracer, Good to talk to you again, you are the man to talk to about FW's. I stumbled on this site and thought I'de see if anyone had this boat as it seems to be few and far between. |
|
| Author: | ardy [ Mon Apr 11, 2011 4:05 am ] |
| Post subject: | Re: 1996 Horizon 170 F/S |
Perhaps check in the previous models section might be helpful. And by the way, "Welcome" |
|
| Author: | LouC [ Mon Apr 11, 2011 6:05 am ] |
| Post subject: | Re: 1996 Horizon 170 F/S |
I second the rot concern especially if the boat has carpet over plywood decking, which most of them probably did, unless it has the optional fiberglass liner. Even then, the deck coring of course is still plywood so check for rot wherever things were mounted to the deck like seat bases, etc. Also check the transom for rot as well, cracks in the 'glass, etc. |
|
| Author: | St. Louis Dave [ Mon Apr 11, 2011 1:42 pm ] |
| Post subject: | Re: 1996 Horizon 170 F/S |
Your factory specs are here: http://assets3.fourwinnsmarketing.com/past_product/specs/1996/ Just pick your boat. |
|
| Author: | pokman [ Tue Apr 12, 2011 7:20 am ] |
| Post subject: | Re: 1996 Horizon 170 F/S |
thanks for the info guys, I am aware of the Four winns site and what to look for when testing it out. I was more looking to see if any members had this boat and what they thought of it. |
|
| Author: | nwrunr [ Tue Apr 26, 2011 8:02 pm ] |
| Post subject: | Re: 1996 Horizon 170 F/S |
I have a 1996 170 Horizon F/S with the Johnson V4 130 hp motor. I absolutely love the boat. I hope we can share info from time to time if needed. |
|
| Author: | sachem29 [ Wed Apr 27, 2011 9:39 am ] |
| Post subject: | Re: 1996 Horizon 170 F/S |
I have a 1997 horizon qx 170 with a johnson 115. The boat goes in the mid to upper forties considering the load, I find it to have pleanty of power for my needs. Still looks and runs great. Good luck N |
|
| Author: | doc99 [ Wed Apr 27, 2011 8:48 pm ] |
| Post subject: | Re: 1996 Horizon 170 F/S |
I have a 99 170 f/s with a 115 johnson. My performance is good with a full tank of fuel 26 gal. and all gear plus all fishing gear and four adults top speed 45 to 46. Pulling tubers and skiers great. Best part fuel usage great at a cruise speed of around 35. |
|
| Author: | pokman [ Mon May 02, 2011 8:34 pm ] |
| Post subject: | Re: 1996 Horizon 170 F/S |
Tadpole, Do you know what bolt hole you have your motor set at? I am only able to get 5100 rpms out of 19p ss prop and I am thinking about raising the motor. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|