Here ya go guys.
| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Four Winns Trailer spare tire mount. https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=7577 |
Page 1 of 1 |
| Author: | qweedqwag [ Sat May 28, 2011 11:34 am ] |
| Post subject: | Four Winns Trailer spare tire mount. |
So after not having a spare tire, I decided it was time to get one, the only problem is I did not want to mount it to the trailer frame and, all the mount I looked at would not mount to the trailer tounge and were 4-5 lug patterns not 6 on 5.5 like mine, so I made my own. The mount turned out awesome, Mike |
|
| Author: | cabwizard [ Sat May 28, 2011 12:54 pm ] |
| Post subject: | Re: Four Winns Trailer spare tire mount. |
Can you post a pic on here Ray |
|
| Author: | EvilZ [ Sat May 28, 2011 1:12 pm ] |
| Post subject: | Re: Four Winns Trailer spare tire mount. |
I'd like to see it also. |
|
| Author: | qweedqwag [ Sat May 28, 2011 4:31 pm ] |
| Post subject: | Re: Four Winns Trailer spare tire mount. |
Here ya go guys.
|
|
| Author: | ridepate [ Sat May 28, 2011 11:18 pm ] |
| Post subject: | Re: Four Winns Trailer spare tire mount. |
I bought one from Northern-Tool for 19.00. It fits my 6 on 5.5. |
|
| Author: | qweedqwag [ Sun May 29, 2011 5:42 pm ] |
| Post subject: | Re: Four Winns Trailer spare tire mount. |
Does it fit on the frame or the tonge? |
|
| Author: | Y-Guy [ Sun Jul 17, 2011 5:45 am ] |
| Post subject: | Re: Four Winns Trailer spare tire mount. |
Ours is mounted back a bit off the tongue, makes it easy to swing the tongue when we close the garage. 
|
|
| Author: | Wet Doggg [ Mon Jul 18, 2011 12:51 pm ] |
| Post subject: | Re: Four Winns Trailer spare tire mount. |
Nice work. I have mine on the tongue as well with the same bolt pattern. I can't remember where I bought the mount though. |
|
| Author: | delo [ Wed Jul 20, 2011 4:03 pm ] |
| Post subject: | Re: Four Winns Trailer spare tire mount. |
I need one. Where did you get it? Does anyone know if you can buy a used one? Thanks |
|
| Author: | qweedqwag [ Wed Jul 20, 2011 10:33 pm ] |
| Post subject: | Re: Four Winns Trailer spare tire mount. |
Delo, I made mine out of two inch tube steel and quarter inch plate, the mounts are folded galvey steel with 4 1/2 inch bolts with nyloc nuts. Fits great and swings out of the way real easy, damn I'm good. Mike |
|
| Author: | kmack [ Tue Aug 30, 2016 11:28 pm ] |
| Post subject: | Re: Four Winns Trailer spare tire mount. |
Kind of reviving an old thread, but I didn't want to start a new one when this one talked about the same thing I just went thru. So about 5 yrs ago, when I bought our boat, I mangled the spare tire mount as I backed over the hump in our driveway (mounted on the side frame rail). So for the last 5 yrs we've had our spare mounted on the trailer tongue...  I've wanted to move it forever...so I finally decided to make a mount for the spare to go in between the frame rails. The attached pictures are of how it turned out. These are the pieces after I cut them. (I did make some minor mods to theses during the build)  Initial welds...  Mounted in place...   With the spare & then the final view!   The paint I used was Rustoleum #7723 Navy (from Home Depot). My trailer paint is faded, but it was a pretty spot-on match!  Just thought I'd share some mods I made to the trailer! |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|