So I was out on the boat Friday night and Saturday and noticed that ever since I had the FW dealer replace my trim pump the one on the gimble housing, my boat has been taking on water, not a ton but enough while at anchor the bilge pump will come on about every one and a half hours and pump may a quart out so I started looking around, I thought it was the thru hull depth sounder (who's geniuos Idea was it to punch a hole in the bottom of a brand new boat) but its sealed up tight, so I found this while looking over the transome, this is the shift cable that runs thru the transome shield, the sealoc manual says the is supposed to be a shift cable sleeve with and oring, can someone with a 200/ss Horizon see what they have and send me a picture so I can go have the dealer fix this issue, here is picture. It's an SX-M drive I can also email a better picture.
Thank you,
Mike