www.iFourWinns.com

looking to replace my shift cable but having a hard time finding out the part number. any ideas where i could look online? i do have a manual but just moved so it's buried somewhere at home at the moment.

boat is
2000 190 horizon
5.0GL/SX

thanks all!

_________________
2006 Nissan Titan SE 6" Lift
2000 Four Winns 190 Horizon 5.0GL

There are dozens of place to get these, but one to always remember when you are searching for anything Volvo-Penta is
the infamous MarinePartsEurope.com.
You can get schematics of engines, drives, parts etc. on their site. With VP part #'s.
It helps to know exactly what drive you have, as you will see on this link.

http://www.marinepartseurope.com/en/vol ... sions.aspx

_________________
One of 4 Previous (Sold) Boats:
2000 Four Winns 268 Vista

Current Boat: 2004 Chaparral 235 ssi cuddy

Thanks for the link!! How do I determine what specific drive I have other than just SX?

Thanks again!

_________________
2006 Nissan Titan SE 6" Lift
2000 Four Winns 190 Horizon 5.0GL

Your cable from the control box back to the drive should be 15' cable... teleflex part number is cc21415...It will have the "OMC" control box end with the Volvo SX drive end threads. Most places should stock the extreme version of this and it will last longer.

_________________
Bryan Mutter

http://www.twincitymarine.com
http://www.facebook.com/twincitymarineinc
http://www.youtube.com/user/twincitymarine
http://www.twitter.com/twincitymarine

+1 to Bryan - definately go with the Extreme version of the cable. It's a big improvement in both feel and reliability over the stock one and only a couple of bucks more.

_________________


Alec

2006 Horizon 190
VP 4.3GL/SX, Sunsport