www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Sun May 11, 2025 9:25 am

View unanswered posts | View active topics


Board index » Four Winns Models » Horizon & Bowriders

All times are UTC - 6 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
  Print view Previous topic | Next topic 
Author Message
fourwinnsjay
PostPosted: Fri Apr 13, 2012 8:52 am 
Offline
Goldfish

Joined: Fri Jul 10, 2009 9:56 am
Posts: 35
Location: Carlinville, IL
This may be a stupid question, but I don't know what this is. I found it was unhooked when I was doing my cleaning? Is it for my speedo?? I have an Alpha One lower unit.

Image
Image

_________________
2005 200 Horizon 5.0 MPI 260hp
2010 Chevy Silverado 1500
Carlinville, IL
Top
 Profile  
 
Paul I.
PostPosted: Fri Apr 13, 2012 3:36 pm 
Offline
email admin your custom rank

Joined: Sun Nov 21, 2010 8:03 am
Posts: 2238
Location: Winthrop, Ma.
The speedo is a tube, that looks more like cable with a connector at one end. Is your trim gauge working?
Top
 Profile  
 
ardy
PostPosted: Fri Apr 13, 2012 11:48 pm 
Offline
life to the full

Joined: Tue Jan 29, 2008 7:13 pm
Posts: 699
Location: Adelaide South Australia
Assuming it is a tube not a cable ( hard to tell from the pic) and it is at the front of the out drive ( nearest the transom) it is for the speedo just click it back in to where it looks like it came from and your speedo should work again. I found out that after a service it had been overlooked by the "mechanic".
hope this helps

_________________
Ardy
Adelaide South Australia
Red H180 3.0 Merc
Top
 Profile  
 
fourwinnsjay
PostPosted: Mon Apr 16, 2012 9:46 am 
Offline
Goldfish

Joined: Fri Jul 10, 2009 9:56 am
Posts: 35
Location: Carlinville, IL
It's a tube. I was guessing it was for Speedo since it hasn't worked lately. My trim works fine. Thanks guys.

_________________
2005 200 Horizon 5.0 MPI 260hp
2010 Chevy Silverado 1500
Carlinville, IL
Top
 Profile  
 
Borchik
PostPosted: Mon Apr 16, 2012 10:55 am 
Offline
email admin your custom rank

Joined: Mon Aug 02, 2010 6:38 am
Posts: 311
Location: Baldwinsville, NY
That is a speedo connector, should snap onto the other end. If you push it on and it pops off then the connector is worn. Running with it disconnected will let some water trickle into the boat as you are underway.

_________________
Brian Borchik
The Winds of Cold Springs Harbor Marina
Baldwinsville, NY
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 

Board index » Four Winns Models » Horizon & Bowriders

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot], Majestic-12 [Bot] and 23 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group