These work great and nothing on the floor to worry about stumbling on.
Garelick 75359
Very sturdy and stows away easily when not in use.
| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Table install on 230 https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=9380 |
Page 1 of 1 |
| Author: | mbirge15 [ Sun May 27, 2012 5:50 am ] |
| Post subject: | Table install on 230 |
Has anyone installed a table in a 230 Horizon? We have the wrap around seating in the rear and thought would be a great place for a table, when enjoying a drink or two. Was thinking a hole in the floor type but not sure the clearence to fuel tank. Thanks in advance, hope to get some response. |
|
| Author: | nhprinter [ Sun May 27, 2012 7:08 am ] |
| Post subject: | Re: Table install on 230 |
We put one in our H190. It's the type with the hole in the floor so there is clearance even in our smaller boat. I'll add that it's the best thing we've ever done to our boat. We have the sunsport seating so when we swivel our seats toward the stern we have seating for four with access to the table. I don't have any pics of it in the boat, but this is the one we had installed. http://www.toddusa.com/productdetails.aspx?id=129&f=11 |
|
| Author: | Cap'n Morgan [ Sun May 27, 2012 7:32 am ] |
| Post subject: | Re: Table install on 230 |
These work great and nothing on the floor to worry about stumbling on. Garelick 75359 Very sturdy and stows away easily when not in use. |
|
| Author: | mbirge15 [ Sun May 27, 2012 9:26 am ] |
| Post subject: | Re: Table install on 230 |
Thanks guys. |
|
| Author: | Ccmblack [ Sun May 27, 2012 9:59 am ] |
| Post subject: | Re: Table install on 230 |
2nd cap'n! The mounting bracket is way strong enough, tabled and mount are solid, and all stores easily on our boat. Only draw back is they don't have a bag to store/protect the table. Cap'n have you found anything? |
|
| Author: | nhprinter [ Sun May 27, 2012 7:43 pm ] |
| Post subject: | Re: Table install on 230 |
Sad to say, but we use a garbage bag. Actually does a good job keeping it clean. I would have loved one of those side mount tables, but I didn't think the frame for the bench seat would be strong enough. Here's a quick pic I took with my cell phone today. 
|
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|