www.iFourWinns.com

Hey Guys, long time lurker and first time poster..

I have a 2002 Horizon 200, took it out over the weekend and made a mistake that resulted in the middle post of the port side bow rail pop up. The front and rear posts are still attached and thankfully the middle one just popped straight up with no damage to the fiberglass. Currently the rail is still attached at the front and back and there is a small stud (for lack of better word) coming out of the bow fiberglass that the rail was attached to, probably sticks up one sixteenth of an inch and is a solid circle the size of the inside of the hollow rail. I took the seat back cushion off and there is an access hole to get to the back bolt that secures the rail on and it looks like I can get to the front bolt through the anchor storage area. I have no idea though how to remove the middle post that remains so I can get it welded back into place and reattached. Has anyone had to remove the bow rail and reinstall? Any ideas how to get to bolt to get it off and reattached? Or possibly a way to reattach the post to the stud that remains in the bow without removing the entire rail (JB weld, etc?). Thanks in advance for the help.