www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
impeller? https://www.smwebhead.com/phpBB3/viewtopic.php?f=3&t=9664 |
Page 1 of 1 |
Author: | masonh220 [ Tue Jun 26, 2012 3:56 am ] |
Post subject: | impeller? |
I have 2008 H220 with 5.7Gi-SX..any tips or suggestions on changing the impeller? |
Author: | Jafo4U [ Sun Jul 15, 2012 7:58 pm ] |
Post subject: | Re: impeller? |
Make sure you keep an eye on those little O-rings they are slippery little suckers!!! Glycerin from your local Walgreens or Pharmacy to lubricate the rubber and the case and I was told by someone on the forum to place the blades opposite from the way they are going to run but I didn't do that and my boat is running fine. I think it had a rubber gasket also. It should take no more than 20 minutes from what I remember. Good luck |
Author: | jntwlsn [ Sun Jul 29, 2012 11:57 pm ] |
Post subject: | Re: impeller? |
masonh220 wrote: I have 2008 H220 with 5.7Gi-SX..any tips or suggestions on changing the impeller? How did the impeller swap turn out? |
Author: | Jafo4U [ Sat Aug 04, 2012 3:01 am ] |
Post subject: | Re: impeller? |
How did everything go ahhhh the joys of boating! ![]() |
Author: | jntwlsn [ Sat Aug 04, 2012 2:31 pm ] |
Post subject: | Re: impeller? |
Jafo4U wrote: How did everything go ahhhh the joys of boating! ![]() What is the ss sleeve on the right hand side? |
Author: | Graham R [ Sat Aug 04, 2012 4:43 pm ] |
Post subject: | Re: impeller? |
looks like a VP front prop removal tool. |
Author: | taz42169 [ Sun Aug 05, 2012 6:11 am ] |
Post subject: | Re: impeller? |
Graham R wrote: looks like a VP front prop removal tool. +1 |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |