www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

Funship Bow Stop
https://www.smwebhead.com/phpBB3/viewtopic.php?f=4&t=6186		 Page 1 of 1
Author:  vujaday [ Wed Jul 21, 2010 7:11 am ]
Post subject:  Funship Bow Stop
The trailer I have has an hourglass bow stop and the front of the funship where it meets the bow is relatively flat. The space between the bars 3.75" in. Any idea where I can get a Bow Stop that is better suited to this boat?

Image
Author:  M3eater [ Wed Jul 21, 2010 7:47 am ]
Post subject:  Re: Funship Bow Stop
Do a google search on "bow roller" and "bow stop" and click the search to do images.

One of these may conform a bit better, even though it starts out as a V:

Image

Or, perhaps a semi-flat roller:

Image

Or, a flat stop:

Image
Author:  EvilZ [ Wed Jul 21, 2010 9:17 am ]
Post subject:  Re: Funship Bow Stop
I think mine originally came with a stop that looked like the middle picture above (in black rubber). When I replaced it, I put one on that looks like what you currently have and dont have any issue with it.
Author:  jacky001 [ Fri Jun 03, 2011 12:18 am ]
Post subject:  Re: Funship Bow Stop
Image
Author:  marietta_ken [ Fri Nov 11, 2011 10:26 am ]
Post subject:  Re: Funship Bow Stop
I know this post is old...but I just joined this site after recently buying a 2003 234 and dealing with the same issue. Just yesterday I spoke to Stoltz rubber products -- who makes a variety of rollers and stops. They have a center roller that is "semi-flat." I think it's model #446. I got that and two of their smaller diameter outer rollers (#435 I think) for an overall more flat setup to match the front of my boat better.


Hope that helps.
Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/