www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

224 with VP 5.0L DP
https://www.smwebhead.com/phpBB3/viewtopic.php?f=4&t=9163
Page 1 of 1

Author:  flaMtneer [ Sun Apr 29, 2012 11:57 am ]
Post subject:  224 with VP 5.0L DP

Anyone have this setup? Wondering how the 5.0 handles the boat?

Author:  marietta_ken [ Tue May 01, 2012 9:37 am ]
Post subject:  Re: 224 with VP 5.0L DP

flaMtneer wrote:
Anyone have this setup? Wondering how the 5.0 handles the boat?


I have the 270HP 5.0GXi DP on my 2003 234. I'd say it pushes it around just fine, but certainly not really powerfully. We tube, wakeboard, etc. without needing anymore. Hole shot is fine, but not amazing. Haven't tried pulling a slalom skiier yet, but expect it'd be plenty to get the job done. Tops out around mid-40mph, which also meets our needs.

I'd expect it to handle your 224 even better. You should be fine. However, if you want something really "meaty," then go with the 5.7.

Author:  ric [ Tue May 01, 2012 10:02 am ]
Post subject:  Re: 224 with VP 5.0L DP

Usually more power = better fuel consumption when putting around too.

If you can, get a GXi engine instead of a Gi. The difference between a Gi and GXi? The GXi has roller cam/lifters, the Gi has standard hydraulic lifters. Don't stress over it though. No difference in reliability.

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/