www.iFourWinns.com

Does anyone have any suggestions as to where to store the cockpit table top and the v-berth fill-in boards when not in use?? Thinking of rigging up some sort of system for the fill-in boards to be stored on either side of the porta potti, but the table top is too big to fit there. Only other option I can think of at this time is down the side of the cockpit seats (but that looks like crap and would not meet Vista Al's high standards).

All input welcomed.

_________________

2010 278 Vista
5.7 GXi DP

Past:
1999 225 Sundowner
5.7 GSi SX

the v-berth fill ins are stored on the port side of the porta potti in my 2004 model ( factory installed). they have two plastic guides fitted on the floor and 'roof', which keep them nesstled together and prevent movement. you can probably get those from FW parts ?

I have found no where good for the table, it just sits on the v-bunk.

_________________

Thanks for the reply. Any chance you could post a pic or 2 of these guides you are talking about. I checked the parts list for 1999 models, but nothing listed. I also checked 2004 (your year) but did not see anything clearly labelled for this application.

_________________

2010 278 Vista
5.7 GXi DP

Past:
1999 225 Sundowner
5.7 GSi SX

i put the table in the case and store it under the big cushion in the v-berth with the top of the table facing up. usually the kids are in there and it doesnt seem to bother them when im out on the water.

i also have the guilds for the fill ins on the side of the stow away head, will post a pic if i get to it before someone else does.

_________________
2001 four winns 215 sundowner

The fill in boards on my '99 225 used to be stored next to the porta potti on the port side; I think, from memory, there were 2 fabric straps that used to clip together to hold them in place; it looked factory fitted. No guides fitted, but the boards were still pretty well secured in place.

My boat had the sunsport seating, so I was lucky, the table would fit under the sunpad, on top of the folding engine cover.

Graham

I put my fill ins up on the ledges inside the cuddy along with my table. I just stuff towels in there to secure them. Not exactly factory, but it works.

_________________


"Where Da Go"
2002 248 Vista
Lafayette, IN
http://blueoceanlife.worldventures.biz