www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

2004 Sudowner 285 - Engine Hatch gas struts
https://www.smwebhead.com/phpBB3/viewtopic.php?f=5&t=23324
Page 1 of 1

Author:  Rocketman_AUS [ Mon Feb 25, 2019 7:56 pm ]
Post subject:  2004 Sudowner 285 - Engine Hatch gas struts

We recently purchased our boat and the engine hatch actuator doesn't exist (previous owner removed it).

I just lift the engine hatch up and down, but it is pretty heavy. Simple solution is just to buy a Gas Strut to assist in taking some of the weight off the lift.

The question is what length to buy it. I can measure the Extended length when the hatch is open so that is easy. What I can't figure out is the "compressed" length when the hatch is closed.

If anyone has a 285 Sundowner and would be kind enough to measure the "fixed" part of the hatch actuator that would be great. Thanks.

Author:  Surface Interval [ Tue Feb 26, 2019 6:19 pm ]
Post subject:  Re: 2004 Sudowner 285 - Engine Hatch gas struts

The Four Winns catalog shows:
048-1322 GAS SHOCK, 12" 30 LB. #GSNI-5100-30

The 048-1322 is the Four Winns P#. GSNI-5100-30 is the manufacturer's P#. You may find them at an auto supply store or on ebay below.

https://www.ebay.com/sch/i.html?_from=R ... HOCK%2C+12"+30+LB.+%23GSNI-5100-30&_sacat=0

Author:  Sea Gar [ Tue Apr 16, 2019 5:32 pm ]
Post subject:  Re: 2004 Sudowner 285 - Engine Hatch gas struts

Rod,

I will be happy to give you the measurements when my boat comes out of storage in May.

Author:  Sea Gar [ Tue Sep 03, 2019 6:18 pm ]
Post subject:  Re: 2004 Sudowner 285 - Engine Hatch gas struts

The fixed part of the actuator is 26" the stroke is 18"

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/