| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Gauge replacement question https://www.smwebhead.com/phpBB3/viewtopic.php?f=5&t=6690 |
Page 1 of 1 |
| Author: | tpfrier1975 [ Sun Sep 26, 2010 8:35 pm ] |
| Post subject: | Gauge replacement question |
I purchased my first boat this summer. It is a 1989 Sundowner 225. There were a few minor issues with it so I am replacing a few parts and adding a second battery. One of the issues is that the tachometer does not work. The dial has no movement when the engine is running. It is the original gauge from '89. I took it out and it is a Kysor / Medallion, model no. STK-210. The dash has a separate flat glass panel under the outer panel. Is there anyone out there who has replaced one or more gauges on this type of dash setup? I'm trying to find a suitable replacement gauge. I've been unable to find a similar gauge on the web. Any help would be greatly appreciated. Thanks. |
|
| Author: | Cap'n Morgan [ Mon Sep 27, 2010 6:28 am ] |
| Post subject: | Re: Gauge replacement question |
A picture of your Tach might help. Teleflex makes a line of gauges similar to the KM tach you have. Sometimes the tach just needs to be re-calibrated. It could also just be the sensor at the engine control box. Here is a trouble shooting guide for the Series II gauges (if that is what you have) http://www.epicmarine.com/docs/MDCtrouble.PDF Otherwise, contact Medallion direct. I just had lunch with one of their engineers last Thursday, had I known of your issue, I could have asked him. http://www.medallionis.com/ContactUs.html |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|