www.iFourWinns.com

I have a Vista 268 and just replaced the Jabsco hand pump assembly on the head. It worked great for a few cruises and now doesn't work in "wet bowl". No water when trying to flush. The "fluid" will go down but no water being pumped. This boat also has a fresh water tank for flushing the head, don't know if this is standard or not. Did the new pump assembly go bad in just 2 months?

_________________
Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover.
Mark Twain


[img][IMG]http://i1313.photobucket.com/albums/t554/bgaskill11/2005Vista268_zps31196126.jpg[/img][/img]

Yep. And Jabsco's are NOTORIOUS for this. Ive had mine replaced 3 times now, under warranty. I think the guy at Jabsco knows me by first name

_________________
1997 Four Winns Vista 278
T - 4.3l EFI
Kohler 4esz Genset
379 hours as of 8/8/21

Try some olive oil down the pump shaft and pump for a while

Shuman 2000 268

Thanks for the input! I will try the Olive Oil and then replace it AGAIN if that doesn't work.

_________________
Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover.
Mark Twain


[img][IMG]http://i1313.photobucket.com/albums/t554/bgaskill11/2005Vista268_zps31196126.jpg[/img][/img]

On my last boat, I used Jabsco electric conversion kit. Worked great.