www.iFourWinns.com

The little digital gauge in the bathroom of my 99 258 Vista that indicates how much of the waste holding tank is filled up has stopped working. Before I start taking out the cabinet to get behind the gauge, I was wondering if anyone knew if there was a fuse for this that I could check. Thanks if anyone has any info on this.

_________________
'99 258 Vista Cool Breeze II

Which model system are you using...Xintex? We have the Xintex system and it does use a small (5amp?) fuse in the DC fuse panel to power the system.

_________________
Our Boating Blog: http://ben-dana.blogspot.com/

2005 268 Vista "Sea Pickle II"
1979 AMF Alcort Puffer
Previous:
2003 FW190 Horizon
1973 Startcraft 18ft "Sea Pickle"

I do believe it is the Xintex. I guess I'll have to check and see if I can find what fuse it is. Do you know if it has its own fuse in the panel?

Thanks for the help.

_________________
'99 258 Vista Cool Breeze II

Yes the circuit for the system had it's own fuse separate from other systems but if I remember correctly it wasn't marked as such. I think it was just marked as a generic accessory fuse. Something else to mention is I did lose power to mine before and it was because the pinch tabs inside the fuse box had lost contact with the fuse blades...might be something to check.

_________________
Our Boating Blog: http://ben-dana.blogspot.com/

2005 268 Vista "Sea Pickle II"
1979 AMF Alcort Puffer
Previous:
2003 FW190 Horizon
1973 Startcraft 18ft "Sea Pickle"

Thanks, I'll check the fuse panel this weekend.

_________________
'99 258 Vista Cool Breeze II

Well I'm not sure which fuse this hooks into, but all the fuses are good, so I would say that is not the issue. When I get a chance I'll have to test the wires that go into the gauge with a multimeter and see if there is power going to it. If so, then I guess I'll have to look into replacing the gauge.

_________________
'99 258 Vista Cool Breeze II