www.iFourWinns.com

Hi all
with the summer over here the first rains have reminded me of a small leak in my hatch , which seems to enter in the gaps in the below picture (it also happens when carefully washing the boat) and just drip down slowly inside at the rear of the hatch exactly half way along.
is there any problem with SEALING the left and right holes facing sternward shown in the picture...what is their actual purpose..
It feels like if they were sealed , the leak would disappear?
any thoughts appreciated !

_________________
Bill P
Marbella, Spain
Vista 248 Year 2000
25th Anniversary edition
Volvo Penta Engine and Outdrive

I don't have this kind of hatch, but it kind of looks like this is where water should come out? not in.

Here is info from the manufacturer:
http://www.lewmar.com/node/1197

Ray

_________________

"Knot Easy" 2000 Horizon 240 Volvo 5.7GS /SX
tow: 2017 Honda PILOT EXL-AWD
prev. boats:
'87 Chaparral 198CXL 4.3 OMC Cobra
'69 Jetstar 16ft Ski Boat, 115hp Yamaha
'68 Aluminum Jon Boat, 3hp Sears
'64 Water Wings

Great link..I had no Idea they were in the UK ! easy for me to call them for once with a four winns issue not having the manufacturer in the states
It enters there for sure as that bit is higher (toward the stern) and slopes slightly down towards the bow

useful link though thanks !

_________________
Bill P
Marbella, Spain
Vista 248 Year 2000
25th Anniversary edition
Volvo Penta Engine and Outdrive