www.iFourWinns.com • View topic - Can ne1 with a 1996 or so Vista help me out with measurement

View unanswered posts | View active topics

Board index » Four Winns Models » Cruiser - Vista

All times are UTC - 6 hours [ DST ]

Can ne1 with a 1996 or so Vista help me out with measurement

Page 2 of 2

[ 18 posts ]

Go to page Previous 1, 2

Print view

Previous topic | Next topic

Author

Message

LVChris

Post subject: Re: Can ne1 with a 1996 or so Vista help me out with measure

Posted: Sat Mar 15, 2014 11:15 pm

email admin your custom rank

Joined: Sat Jul 21, 2012 12:44 am
Posts: 733
Location: Las Vegas, NV

boater50 wrote:

Chris;

Ok, I have the exact measurements of that piece------ on my boat it is 40" long, 3" wide, and about 3/4" thick.
On mine- pointing to port, this piece has an approximately 4" radius end. I'll assume that any curve will do so as not to clip your feet or shin ......hope this helps!

Steve

That's perfect thanks steve!

_________________

Chris and Alicia
Las Vegas, NV
ALTIVA
1996 Four Winns 238 Vista Dlx 5.8Fi

Top

LVChris

Post subject: Re: Can ne1 with a 1996 or so Vista help me out with measure

Posted: Mon Oct 12, 2015 1:12 pm

email admin your custom rank

Joined: Sat Jul 21, 2012 12:44 am
Posts: 733
Location: Las Vegas, NV

Since I couldn't go on the water this weekend, I decided to tackle this project. The starboard has been sitting in my garage for months. It took me most of the morning to do, mostly because I have very little faith in my ability to do tasks like this. In the end I just dove in, had a couple of hiccups..one of the threaded sleeves in the seat seems to be spinning freely (ill have to fix that when I redo the seats). But here it is, it works, but not sure I will leave it there as I am guessing it will be a shin killer...time will tell.

_________________

Chris and Alicia
Las Vegas, NV
ALTIVA
1996 Four Winns 238 Vista Dlx 5.8Fi

Top

Jsyphil

Post subject: Re: Can ne1 with a 1996 or so Vista help me out with measure

Posted: Tue Oct 13, 2015 5:33 am

Shark

Joined: Thu Dec 04, 2014 10:09 am
Posts: 138
Location: Jersey, Channel Islands (UK)

Good work Chris, looks good.

Top

Page 2 of 2

[ 18 posts ]

Go to page Previous 1, 2

Board index » Four Winns Models » Cruiser - Vista

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 22 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum