txvista wrote:
It doesn't look like mine, but I would guess where you said it located it is a black water tank. That does look like the vent line also. I was one of the lucky ones to get to two black water tanks. You are right, the main one was under the floor in the cabin, and the second one was under the port bench in the aft cabin. Terrible design. Waste would travel from the vacuflush to the tank in the aft cabin. Gravity was suppose to bring the waste down a hose, make a 90 degree turn, then enter the belly tank in the floor. The pump out was connected to the belly tank. Needless to say there was a clog in the 90 degree elbow when I bought the boat. Called Four Winns to confirm that there were two black tanks, but he said there shouldn't be a 90 degree elbow. They were wrong.
Here was the thread to my issue. Let me know if you need anything else.
viewtopic.php?f=6&t=3257Thanks, so I'm not crazy. So in the end you removed the port, aft tank correct? I can't see it all, but it doesn't look like my hose between tanks has a 90 degree elbow in it. What seemed odd to me is that the hose from the head to the aft port tank does have a 90 degree elbow - this strikes me as odd and I wonder if there was a reason to cut the hose and this is what was put in place?
So far it all seems to be working fine, except for the tank gauge which always reads full. I'm guessing I can just unthread it and clean it off. There is probably some junk causing it to read full.
Next pump out I'll have to verify that the top tank does indeed empty.