| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Any Idea where to get this part? https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=10280 |
Page 1 of 2 |
| Author: | LVChris [ Thu Sep 06, 2012 11:34 am ] |
| Post subject: | Any Idea where to get this part? |
This is from someone else's pic, but my boat is missing this piece. The plastic lip at the edge of the seat, it's there to hold up the other cushions for making this area a bed. Maybe I should just make one myself? I think I'd use metal so it would hold up better... 
|
|
| Author: | Paul I. [ Thu Sep 06, 2012 12:20 pm ] |
| Post subject: | Re: Any Idea where to get this part? |
If I was to make it, I would look at starboard. |
|
| Author: | Winter Sux [ Thu Sep 06, 2012 1:22 pm ] |
| Post subject: | Re: Any Idea where to get this part? |
YUP,,,,star board for sure. It costs a few bucks but you'll never have to make another one. |
|
| Author: | LVChris [ Thu Sep 06, 2012 1:51 pm ] |
| Post subject: | Re: Any Idea where to get this part? |
So where do I get "Starboard"? Can I cut and shape it myself or do I need special tools? TIA |
|
| Author: | gregs [ Thu Sep 06, 2012 1:53 pm ] |
| Post subject: | Re: Any Idea where to get this part? |
West Marine. Use woodworking tools. Nothing special required. |
|
| Author: | Paul I. [ Thu Sep 06, 2012 3:18 pm ] |
| Post subject: | Re: Any Idea where to get this part? |
West Marine charges TOO much for everything. Defender.com has it for less or google it. Its like working with a hard pine or softer than oak. Before you take a router to it, use a piece of scrap first. |
|
| Author: | LVChris [ Wed Jun 24, 2015 2:22 pm ] |
| Post subject: | Re: Any Idea where to get this part? Vista Owners? |
So I bought a piece of Starboard on E-bay (great price $30 shipped) for 1/2" 12"x48" scrap. Now I am hoping someone out there a an accurate measurement for this piece. I am sure I can make some measurements, and make an educated guess...but that will require me to be with the boat...and it's in storage. I'd rather do it right the first time, So I was hoping someone out there has a good measurement and can get me started making a template and I can go from there. I guess I just need length and width and maybe corner radius? I have never actually seen one, so I am a little hesitant to just make a good guess. TIA.
|
|
| Author: | Jdpber [ Wed Jun 24, 2015 2:24 pm ] |
| Post subject: | Re: Any Idea where to get this part? |
ebay starboard and cut to fit and router the edges. boom done. $30 and you are done |
|
| Author: | LVChris [ Wed Jun 24, 2015 3:29 pm ] |
| Post subject: | Re: Any Idea where to get this part? |
Jdpber wrote: ebay starboard Which I did....already Quote: and cut to fit and router the edges. boom done. $30 and you are done I'm not as handy as you  ...so I was hoping to get some measurements from an existing one, as mine was missing when I bought her. So that I can do it right the first time
|
|
| Author: | Graham R [ Wed Jun 24, 2015 4:24 pm ] |
| Post subject: | Re: Any Idea where to get this part? |
I had to make a smaller piece for my 2009 Vista; the factory one was not protruding enough, so the seat cushion that was resting on it would collapse as soon as anyone sat on it. Moral; don't assume the factory piece and its dimensions are fit for purpose ! I used some 1/2" thick engineering nylon sheet I had lying around ( a relic from my job in the plastics industry). For years I have struggled to cut such substrates in a straight line with a jigsaw . This time I used a TCT circular saw, so, so, easy ! |
|
| Author: | Jsyphil [ Thu Jun 25, 2015 6:02 am ] |
| Post subject: | Re: Any Idea where to get this part? |
Hi mate, Are your seats 'straight across' like the ones you pictured, as mine are the later model of Vista and are slightly more 'curvy' so to speak! If yours are the same shape as mine i'm happy to measure mine in a few places and pm you details.... |
|
| Author: | LVChris [ Thu Jun 25, 2015 9:02 am ] |
| Post subject: | Re: Any Idea where to get this part? |
Jsyphil wrote: Hi mate, Are your seats 'straight across' like the ones you pictured, as mine are the later model of Vista and are slightly more 'curvy' so to speak! If yours are the same shape as mine i'm happy to measure mine in a few places and pm you details.... Thanks for the offer but mine is just like the picture, straight across. |
|
| Author: | powellcrazy [ Sun Jul 05, 2015 10:23 am ] |
| Post subject: | Re: Any Idea where to get this part? |
LVChris, If you can not get any one to get you rough measurements, you will have to take some card board to your boat and create a template. I recommend going big and trim down to what works after "test fitting". As mentioned above, what works on someone else s boat or from the factory may not work best for your boat or use. |
|
| Author: | powermaker [ Wed Jul 08, 2015 6:23 pm ] |
| Post subject: | Re: Any Idea where to get this part? |
Do you want me to see if it's on the abandoned 238 behind my boat mechanics shop ? |
|
| Author: | LVChris [ Thu Jul 09, 2015 1:48 am ] |
| Post subject: | Re: Any Idea where to get this part? |
Powermaker, couldn't hurt. I already bought the starboard to cut and make one, but really wish I had a rough measurement to start with. Thanks! |
|
| Page 1 of 2 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|