| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| dining room table for 268 vista https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=11004 |
Page 1 of 1 |
| Author: | VICTORIOUS1 [ Mon Feb 25, 2013 9:19 pm ] |
| Post subject: | dining room table for 268 vista |
hello all, new to this site spent a good part of the day reading various post and i can't say thank you enough. i just purchased a 2000 268 in oct. (just in time to cover it up) lots of great ideas and tips on this site and i'm counting the min. when i can start doing stuff on it, for now i was hoping someone can tell me where does the dining room table get stored, is there an actual spot for it? thanks for your help |
|
| Author: | Cap'n Morgan [ Tue Feb 26, 2013 7:04 am ] |
| Post subject: | Re: dining room table for 268 vista |
We stored ours in the mid cabin if it's not being used. or in the head along the wall. |
|
| Author: | Bliss36 [ Tue Feb 26, 2013 10:40 am ] |
| Post subject: | Re: dining room table for 268 vista |
We use the wood cabin table in the cockpit and the V berth. We use the same table post and just move the table to where it's needed or where it's out of the way. Otherwise we also store it in the mid cabin. There isn't a specific storage area that I know of.  
|
|
| Author: | JeffLW [ Tue Feb 26, 2013 4:54 pm ] |
| Post subject: | Re: dining room table for 268 vista |
Cap'n Morgan wrote: We stored ours in the mid cabin if it's not being used. or in the head along the wall. Hey Cap'n, How did you secure it in the head? Or did you just set it in there while in the slip? I was thinking of storing the v-berth and/or cockpit fill-in pieces in the head. Have them under the aft cabin cushions now and as you can guess they are not very comfy to sleep on if I forget to take them out before bed.  I was thinking maybe an adjustable shower rod or two to hold them against the wall. If I'm not mistaken didn't some older Vistas have table storage in the head? |
|
| Author: | shuman [ Tue Feb 26, 2013 7:55 pm ] |
| Post subject: | Re: dining room table for 268 vista |
A great way to keep things from slipping off your table is a piece off rubber matting 3 feet long. Sell it at the dollar stores but worth a million in such that food plates remain stable in a wake wash .Enjoy your 268 I am sure it will give you hours of fun . Get a bbq and get cookin  Best John |
|
| Author: | Pipedreams [ Tue Feb 26, 2013 9:02 pm ] |
| Post subject: | Re: dining room table for 268 vista |
I also went down to just the wood table we leave it set up in the cockpit at all times . On a 2000 vista they used 2 diffrant poles from inside to outside , i welded 3/4 ss threads to the bottom of my large table leg now it work upstairs and downstairs one table one leg equals more storage. Welcome to the FW family i also have a 2000 268 and love it and love custumizing it any qustions let me now |
|
| Author: | rlb [ Tue Feb 26, 2013 9:15 pm ] |
| Post subject: | Re: dining room table for 268 vista |
Pipedreams....would you mind expanding on..."I welded 3/4" threads to the bottom of my large table leg"? This seems like a fantastic idea. My boats presently in storage but I think this is one of the first things I'll do when I see it next. Thanks |
|
| Author: | Pipedreams [ Tue Feb 26, 2013 10:14 pm ] |
| Post subject: | Re: dining room table for 268 vista |
I took the leg from downstairs that fits into the bottom of the cherry wood table , picked up a large stainless stell 3/4 bolt that threaded into the table mount uptairs brought bolth to local welder had him cut a small alum. Disk that fit in the bottom of round table leg we then welded it flush the tapped the center of this disk , cut the head off the bolt threaded it in the disk then cross drilled and put a grade 8 pin threw it i could send you a pic once i take the cover off in a couple weeks . The hole thing cost me 30$ |
|
| Author: | Pipedreams [ Tue Feb 26, 2013 10:16 pm ] |
| Post subject: | Re: dining room table for 268 vista |
Leg works great up stairs and down |
|
| Author: | rlb [ Tue Feb 26, 2013 10:28 pm ] |
| Post subject: | Re: dining room table for 268 vista |
Ok, I'm close to understanding this. Does the 3/4" bolt stay in it or is it removed via the grade 8 pin? Ah man, now I'm not so sure anymore...a picture would be great if you think of it. Thanks |
|
| Author: | Pipedreams [ Wed Feb 27, 2013 6:47 am ] |
| Post subject: | Re: dining room table for 268 vista |
The bolt stays in if you look at the bottom of the leg theres 1.5 inches of thread sticking out of the alum. Disk this always stays the pin is in to stop the bolt from spinning i would of welded it but ss to alum didnt work |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|