www.iFourWinns.com • View topic - 2000 298 V Bow Roller

View unanswered posts | View active topics

Board index » Four Winns Models » Cruiser - Vista

All times are UTC - 6 hours [ DST ]

2000 298 V Bow Roller

Page 1 of 1

[ 8 posts ]

Print view

Previous topic | Next topic

Author

Message

TomT

Post subject: 2000 298 V Bow Roller

Posted: Thu Apr 04, 2013 10:15 pm

Minnow

Joined: Thu Jul 12, 2012 9:15 pm
Posts: 14

Anyone know the maker of the bow / anchor roller unit on my 2000 298 Vista? The roller needs to be replaced - need a 3" wde X 3" dia roller, preferably delrin material. I sent Lewmar pictures of mine but they say it isn't one of theirs.

Thanks for you help!

TomT

Top

Alan_G_298Vista

Post subject: Re: 2000 298 V Bow Roller

Posted: Fri Apr 05, 2013 6:40 pm

Shark

Joined: Mon Jan 16, 2012 5:51 pm
Posts: 143
Location: Victoria Harbour, Ontario, Canada

TomT wrote:

Just go to any marine supply store such as West Marine, or a good marina chandelry, they have all kinds of them in there. I've replaced mine this way.

_________________
2004 Four Winns 298 Vista
"Last Minute"

Top

TomT

Post subject: Re: 2000 298 V Bow Roller

Posted: Fri Apr 05, 2013 11:10 pm

Minnow

Joined: Thu Jul 12, 2012 9:15 pm
Posts: 14

Thanks but I've already tried that route. West Marine 3" dia delrin roller was actually 3 3/8" wide that would not fit - too wide to fit in the stainless steel channel.

Top

JohnnyMarlin

Post subject: Re: 2000 298 V Bow Roller

Posted: Fri Apr 05, 2013 11:56 pm

email admin your custom rank

Joined: Tue Jul 31, 2012 1:34 pm
Posts: 269
Location: Orange County, CA

If you can't find what you need...... Send me a picture or drawing and I will make you what you want...... Plastics manufacturer since 1984....

_________________

2005 Four Winns Funship 214 VP 5.7/Duo Prop

Top

TomT

Post subject: Re: 2000 298 V Bow Roller

Posted: Mon Apr 08, 2013 8:21 pm

Minnow

Joined: Thu Jul 12, 2012 9:15 pm
Posts: 14

Wow - are you serious? I knew that boat people were friendly and helpful but this goes beyond my imagining. Really?

Top

JohnnyMarlin

Post subject: Re: 2000 298 V Bow Roller

Posted: Mon Apr 08, 2013 10:24 pm

email admin your custom rank

Joined: Tue Jul 31, 2012 1:34 pm
Posts: 269
Location: Orange County, CA

Before I give you my final answer.........Private message me that same picture that you sent to Lewmar.........If I'm able to make it........Sure.......I have no problem helping you out.......

_________________

2005 Four Winns Funship 214 VP 5.7/Duo Prop

Top

Capt. Hoss

Post subject: Re: 2000 298 V Bow Roller

Posted: Tue Apr 09, 2013 7:02 am

email admin your custom rank

Joined: Sun May 20, 2012 8:22 pm
Posts: 274
Location: New Carlisle, Ohio

This is the kind of stuff I really like about this site. If you could win the internet, you guys would deffinatly do so.

_________________
1990 Four Winns Horizon 200
2005 GMC Sierra

Top

afw200

Post subject: Re: 2000 298 V Bow Roller

Posted: Tue Apr 09, 2013 7:29 am

Shark

Joined: Mon Apr 08, 2013 7:19 am
Posts: 111
Location: S. Wisc.

Seasense Bow Stop 3" X 3" Poly Part #50080922 :?:

On Sale For: $6.02

Lewmar, Delrin Roller - 3 in. Diameter
Part # 68000856 $26.76 each

Your pulpit anchor roller was likely made by Simpson-Lawerence. similar to this w/Delrin Roller.
check with them also.
http://www.foreandaftmarine.com/239-66840007.htm

_________________
2005 H200

Top

Page 1 of 1

[ 8 posts ]

Board index » Four Winns Models » Cruiser - Vista

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 18 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum