| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| 2000 298 V Bow Roller https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=11137 |
Page 1 of 1 |
| Author: | TomT [ Thu Apr 04, 2013 10:15 pm ] |
| Post subject: | 2000 298 V Bow Roller |
Anyone know the maker of the bow / anchor roller unit on my 2000 298 Vista? The roller needs to be replaced - need a 3" wde X 3" dia roller, preferably delrin material. I sent Lewmar pictures of mine but they say it isn't one of theirs. Thanks for you help! TomT |
|
| Author: | Alan_G_298Vista [ Fri Apr 05, 2013 6:40 pm ] |
| Post subject: | Re: 2000 298 V Bow Roller |
TomT wrote: Anyone know the maker of the bow / anchor roller unit on my 2000 298 Vista? The roller needs to be replaced - need a 3" wde X 3" dia roller, preferably delrin material. I sent Lewmar pictures of mine but they say it isn't one of theirs. Thanks for you help! TomT Just go to any marine supply store such as West Marine, or a good marina chandelry, they have all kinds of them in there. I've replaced mine this way. |
|
| Author: | TomT [ Fri Apr 05, 2013 11:10 pm ] |
| Post subject: | Re: 2000 298 V Bow Roller |
Thanks but I've already tried that route. West Marine 3" dia delrin roller was actually 3 3/8" wide that would not fit - too wide to fit in the stainless steel channel. |
|
| Author: | JohnnyMarlin [ Fri Apr 05, 2013 11:56 pm ] |
| Post subject: | Re: 2000 298 V Bow Roller |
If you can't find what you need...... Send me a picture or drawing and I will make you what you want...... Plastics manufacturer since 1984.... |
|
| Author: | TomT [ Mon Apr 08, 2013 8:21 pm ] |
| Post subject: | Re: 2000 298 V Bow Roller |
Wow - are you serious? I knew that boat people were friendly and helpful but this goes beyond my imagining. Really? |
|
| Author: | JohnnyMarlin [ Mon Apr 08, 2013 10:24 pm ] |
| Post subject: | Re: 2000 298 V Bow Roller |
Before I give you my final answer.........Private message me that same picture that you sent to Lewmar.........If I'm able to make it........Sure.......I have no problem helping you out....... |
|
| Author: | Capt. Hoss [ Tue Apr 09, 2013 7:02 am ] |
| Post subject: | Re: 2000 298 V Bow Roller |
This is the kind of stuff I really like about this site. If you could win the internet, you guys would deffinatly do so. |
|
| Author: | afw200 [ Tue Apr 09, 2013 7:29 am ] |
| Post subject: | Re: 2000 298 V Bow Roller |
Seasense Bow Stop 3" X 3" Poly Part #50080922  On Sale For: $6.02 Lewmar, Delrin Roller - 3 in. Diameter Part # 68000856 $26.76 each Your pulpit anchor roller was likely made by Simpson-Lawerence. similar to this w/Delrin Roller. check with them also. http://www.foreandaftmarine.com/239-66840007.htm 
|
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|