www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
298 V Cabin Screens https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=11139 |
Page 1 of 1 |
Author: | SteveJ [ Fri Apr 05, 2013 6:30 am ] |
Post subject: | 298 V Cabin Screens |
We have a 2001 298 and would like to replace the screens in the cabin windows. Looking for info on how it is done...whether the screens are framed or just fitted in. Thanks. Steve |
Author: | weather [ Fri Apr 05, 2013 12:54 pm ] |
Post subject: | Re: 298 V Cabin Screens |
The screens are bonded to an oval shaped plastic part and held in with a rubber gasket - remove the rubber gasket and they come out. A couple of our gaskets came off during some rough rides and the screens are on the bottom of Lake Ontario. I'm going to try to source them through Taylor Marine (http://www.taylormarine.com/) (I've gotten other port light parts from them). These are off our 328, which should be the same: ![]() ![]() |
Author: | SteveJ [ Fri Apr 05, 2013 7:58 pm ] |
Post subject: | Re: 298 V Cabin Screens |
Thanks very much. Will pull them out in the spring. Steve |
Author: | weather [ Sat Apr 13, 2013 2:20 pm ] |
Post subject: | Re: 298 V Cabin Screens |
I got a price for these - $39 each! Needless to say I'm going to see if I can't make my own, just need to figure out where I can get thin plastic (1-1.5mm thick) to cut out. |
Author: | SteveJ [ Sat Apr 13, 2013 5:28 pm ] |
Post subject: | Re: 298 V Cabin Screens |
Ouch. I was thinking the same...either re-screening the frames we have, or somehow making a replacement. Where did you find the screens? |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |