www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
2004 268 stern seat support legs https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=11375 |
Page 1 of 1 |
Author: | LtDan [ Sun May 05, 2013 3:16 pm ] |
Post subject: | 2004 268 stern seat support legs |
The detents are messed up on the support legs for the stern seat that you remove to access the engine compartment hatch. I've done searches and checked the Four Winns website, I cannot find a part number for them. Can anyone point me in the right direction? |
Author: | erie cruiser [ Sun May 05, 2013 5:03 pm ] |
Post subject: | Re: 2004 268 stern seat support legs |
I just bought one from iboats.com, the problem is that it was 13 1/2". I needed 12", still cant find that size. Measure first before ordering. Good luck. |
Author: | firecadet613 [ Sun May 05, 2013 6:17 pm ] |
Post subject: | Re: 2004 268 stern seat support legs |
Remove the rubber boot on the bottom and trim it with a hacksaw. It was made by Garelick. |
Author: | TFD2001 [ Mon May 06, 2013 6:28 am ] |
Post subject: | Re: 2004 268 stern seat support legs |
firecadet613 wrote: Remove the rubber boot on the bottom and trim it with a hacksaw. It was made by Garelick. Contact Garelick direct too. They got us a replacement one for our 328 and it was the same part number that FourWinns used. They knew what parts of theirs were used by model and year.. |
Author: | LtDan [ Mon May 06, 2013 10:24 am ] |
Post subject: | Re: 2004 268 stern seat support legs |
Outstanding! Thank you. |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |