www.iFourWinns.com https://www.smwebhead.com/phpBB3/
Trim Tabs not working on my Vista 278 (2006) https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=11747	Page 1 of 1

---

Author:	marklosch [ Fri Jun 07, 2013 8:35 am ]
Post subject:	Trim Tabs not working on my Vista 278 (2006)
Just bought my first Four Winns - a 2006 Vista 278. The Trim Tabs (Bennet) are not working. I've checked the fuse and the oil level. Both are fine. Anyone have any ideas?

---

Author:	taz42169 [ Fri Jun 07, 2013 6:34 pm ]
Post subject:	Re: Trim Tabs not working on my Vista 278 (2006)
Power at the switch?

---

Author:	Thalasso [ Sat Jun 08, 2013 9:00 am ]
Post subject:	Re: Trim Tabs not working on my Vista 278 (2006)
how the system works and troubleshooting http://www.bennetttrimtabs.com/videoplayer.php?vID=10 Noise From The Pump But Tabs Don't Move http://www.bennetttrimtabs.com/videoplayer.php?vID=22 "No Noise From The Pump" http://www.bennetttrimtabs.com/videoplayer.php?vID=13 All screws must be tight on the back of the switch. Then check for corrosion on all connections

---

Author:	alanurt [ Sat Jun 08, 2013 12:01 pm ]
Post subject:	Re: Trim Tabs not working on my Vista 278 (2006)
After sitting for a long period of time (winter), my trim tab motor froze. Take the plastic cover off and lightly tap the motor with a hammer while someone holds the switch down. Worked for me twice. Check all power issues first, of course.

---

Author:	marklosch [ Tue Jun 11, 2013 9:06 am ]
Post subject:	Re: Trim Tabs not working on my Vista 278 (2006)
Thanks for all your tips. The Bennet site was great for trim tab info. I'll try to get things going this weekend.

---

Author:	Rick2752 [ Tue Jun 11, 2013 12:54 pm ]
Post subject:	Re: Trim Tabs not working on my Vista 278 (2006)
Call bennett when you r near them. Their customer service was top notch when I called them

---

Page 1 of 1	All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/