www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

2005 348 depth transducers
https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=12061
Page 1 of 1

Author:  psusound [ Sun Jul 28, 2013 4:12 pm ]
Post subject:  2005 348 depth transducers

So, having some issues with my DSM and MFD. I have a C-80 and a DSM 300. Has been determined they need to be sent in. But..in trouble shooting, noticed I have 2 transducers in the hull.

The DSM is on an accessory switch on the dash, though I still get a correct depth reading with the DSM off.

My main question is why 2 transducers? One says 20 degree tilt on it. Does one go directly to the C-80, and the other to the DSM?

Pretty sure this was done stock, and not after the fact. Any insight anyone?

Thanks!

Author:  wkearney99 [ Sun Jul 28, 2013 7:18 pm ]
Post subject:  Re: 2005 348 depth transducers

One is probably depth and temp. The other is the fish finder transducer, which can also do depth. I've got the depth/temp sensor in my 348, but the temp went bananas last winter. Depth still works and I don't need the temp bad enough to pull the boat to replace it.

Author:  psusound [ Sun Jul 28, 2013 8:28 pm ]
Post subject:  Re: 2005 348 depth transducers

OK, gotcha. Yeah, my temp just started going haywire. Reading 30 degrees in the Potomac right now haha. Guess I will have it changed out next time we get pulled, probably not this winter, but next winter.

Author:  wkearney99 [ Sun Jul 28, 2013 8:36 pm ]
Post subject:  Re: 2005 348 depth transducers

Yup, mine started reading 130F over the previous winter. Then various randomness, like 17F this Spring. Now it just doesn't respond at all. I don't really miss it, but I will replace it the next time we pull the boat.

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/