www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

TV installation in Vista 278 year 2007
https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=12400		 Page 1 of 1
Author:  kitos [ Sat Oct 05, 2013 9:53 am ]
Post subject:  TV installation in Vista 278 year 2007
Hello friends,

I have just bought the AVTEX 16" http://www.avtex.co.uk/tv-dvd/avtex-w164dr.html and I need some advise where and how to install, any help please

thanks
Author:  Cap'n Morgan [ Sat Oct 05, 2013 11:24 am ]
Post subject:  Re: TV installation in Vista 278 year 2007
Search. There are threads of how it can be done if you look.
Author:  kitos [ Sun Oct 06, 2013 4:13 am ]
Post subject:  Re: TV installation in Vista 278 year 2007
hello

thanks for the message, I did a search but could not find how to take out the bulkhead which is on the side of the head

any ideas thanks
Author:  jfair [ Sun Oct 06, 2013 8:25 pm ]
Post subject:  Re: TV installation in Vista 278 year 2007
My factory installed TV (2006 Vista 278) is installed with a wall mount that is screwed to the bulkhead you mentioned. There's plywood between the vinyl and the fibreglass. I can't see any reason for dismantling the bulkhead.
My TV fell down once, the screws pulled out from the plywood. I fixed the problem by using heavier screws. If it happens again I think the solution would be to take down the mirror in the head and make a couple of holes in the fibreglass to get access to the back of the plywood, then cover the holes by replacing the mirror. I could then use nuts and bolts to hold the TV bracket to the plywood.
I hope this is explained properly, if not I would be happy to attach a photo.

Update: Not from my boat but similar...

Image

Image
Author:  ric [ Sun Oct 06, 2013 8:52 pm ]
Post subject:  Re: TV installation in Vista 278 year 2007
16" is tiny! Got a 24" on my cuddy. You'll enjoy it. With the mount I purchased I didn't have to take the bulkhead off I just used 1/2in screws into the plywood bulkhead. 6 of them. Not going anywhere

Don't mind the wiring I hid it later. I runs on an MK808b android computer with wireless keyboard with a built in touchpad. I load movies to a thumb drive, or tether it to my smartphone's internet for streaming netflix or youtubes.

Image
Author:  kitos [ Fri Oct 11, 2013 2:19 pm ]
Post subject:  Re: TV installation in Vista 278 year 2007
thanks for the info , have a nice weekend to you all :D
Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/