www.iFourWinns.com

Hello !

I have a 3 years old antifouling paint by a marine dealer.
it still in good shape.

I want to refresh it. which antifouling paint is compatible with all other ? I don't know which brand dealer used.

thanks

Yannick

Can you call the dealer and ask? If you don't get it right your going to have problems with adhesion.

_________________
Jeff

'14 Cruisers 380 Express "Simon Sez"
Merc 8.2 Mag MPI 380
DTS B3X, (x2) Axius Premier


(SOLD)
'08 V318
Merc 350 Mag MPI 300
DTS Seacore, B3 (x2)

Is there an antifouling paint that stick over all other ? no adhesion problem?

You need to find out or you can have a big mess on your hands. It can be a hard paint (modified epoxy) or an ablative (the kind that wears off). You are best off sticking with the type used in the first place. If you have an ablative then you must stick with that. If you have a modified epoxy then you can go with that or an ablative. The modified epoxy types usually have to be redone each year because they lose effectiveness when the boats out of the water. The ablative can last several seasons, and touched up when it wears off.

_________________
88 Four Winns 200 Horizon
4.3 OMC Cobra-4bbl
2002 Walker Bay 10/2012 Suzuki 2.5
2008 Walker Bay 8

1998 Jeep Grand Cherokee 4.0/Selectrac
2007 Jeep Grand Cherokee 5.7 Hemi/Quadradrive II

thanks all,

I found this useful link : http://www.yachtpaint.com/LiteratureCen ... rt-usa.pdf

have a look.

I use Micron CSC, very little growth when I hauled out today.

_________________
2007 358 T-5.7GXi IB
Previous Boats
'08 H240, '08 V318, '04 268, '04 225