| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Is a danforth anchor samething as a Fortress anchor? https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=12610 |
Page 1 of 1 |
| Author: | Family knot [ Mon Feb 03, 2014 5:15 pm ] |
| Post subject: | Is a danforth anchor samething as a Fortress anchor? |
Hey Someone said something that was confusing the other day. They said a danforth is an aluminum Fortress anchor and very strong. I see separate websites for each anchor brand and they both come in the fluke style. Is it common to refer to these anchors interchangeably? Or common to refer to fluke anchors as Danforth or Fortress anchors? My 298 currently has a Danforth fluke anchor, I think, and the previous owner says it won't self deploy because the pulpit was made for a plow anchor that I presume is heavier. |
|
| Author: | kd4pbs [ Mon Feb 03, 2014 5:20 pm ] |
| Post subject: | Re: Is a danforth anchor samething as a Fortress anchor? |
http://www.boatus.com/foundation/guide/navigation_31.html A Danforth isn't necessarily aluminum, but can be. The plow anchors are easier to deploy because of the weight and the fact that the weight is towards the front, as well as not being able to "hook" itself on the roller. My Vista had a Danforth style anchor when I bought it, and when I installed the windlass, it was replaced with a polished stainless Lewmar plow. Sometimes these are even called "self-deploying" due to their shape. |
|
| Author: | purdueosch [ Mon Feb 03, 2014 5:32 pm ] |
| Post subject: | Re: Is a danforth anchor samething as a Fortress anchor? |
Danforth and Fortress are both different approaches to the fluke style anchor. They may look the same, but they have different patents protecting their names. For example, Fortress anchors can be taken apart, Danforth anchors can not. I wouldn't use the names interchangeably in my opinion. |
|
| Author: | Bliss36 [ Mon Feb 03, 2014 5:50 pm ] |
| Post subject: | Re: Is a danforth anchor samething as a Fortress anchor? |
Same thing happens with the Claw style anchors also. Bruce anchors were the original design but countless copies of this anchor are still referred to as "Bruce" although Bruce hasn't produced one in many years. Seems that the name sticks from the original manufacturer as cheap copies are spun off. Belgium made Bruce anchors are getting hard to come by, and at one time they were everywhere....I have a cheap copy  
|
|
| Author: | purdueosch [ Mon Feb 03, 2014 6:05 pm ] |
| Post subject: | Re: Is a danforth anchor samething as a Fortress anchor? |
Bliss36 wrote: Same thing happens with the Claw style anchors also. Bruce anchors were the original design but countless copies of this anchor are still referred to as "Bruce" although Bruce hasn't produced one in many years. Seems that the name sticks from the original manufacturer as cheap copies are spun off. Belgium made Bruce anchors are getting hard to come by, and at one time they were everywhere....I have a cheap copy No worries...I have a cheap copy of a Danforth.
|
|
| Author: | Paul I. [ Mon Feb 03, 2014 10:24 pm ] |
| Post subject: | Re: Is a danforth anchor samething as a Fortress anchor? |
The bid difference is the Fortress is lighter and its flukes are sharper and thinner. This gives it more holding power than a Danforth. They claim a plow anchor is the way to go. It will not pull out if the wind shifts 180. I was in a storm 2 years ago (there is a post in this) we were in 60mph winds. My fortress held us were other boats run aground or had to power up. |
|
| Author: | Alan_G_298Vista [ Tue Feb 04, 2014 2:59 pm ] |
| Post subject: | Re: Is a danforth anchor samething as a Fortress anchor? |
Bliss36 wrote: Same thing happens with the Claw style anchors also. Bruce anchors were the original design but countless copies of this anchor are still referred to as "Bruce" although Bruce hasn't produced one in many years. Seems that the name sticks from the original manufacturer as cheap copies are spun off. Belgium made Bruce anchors are getting hard to come by, and at one time they were everywhere....I have a cheap copy I have a 298 with the 10.5kg Bruce style, a slightly less cheap copy (as it's polished!) I swear by it, holds in a huge variety of bottoms, sets easily, and we've been through some brutal storms on the hook and it's never come out on us. 
|
|
| Author: | kd4pbs [ Wed Feb 05, 2014 12:17 pm ] |
| Post subject: | Re: Is a danforth anchor samething as a Fortress anchor? |
I'll also give two thumbs up to the delta plow style. Give it enough rode and she holds like nobody's business. If I tie off the stern to a tree, it will either pull the tree or stall the windlass when I winch on it, and we have very silty bottomed lakes around here. 
|
|
| Author: | noexcuses [ Wed Feb 05, 2014 1:34 pm ] |
| Post subject: | Re: Is a danforth anchor samething as a Fortress anchor? |
I had a Fortress anchor on my 298 for a couple of years, it will not self deploy either. Due to its light weight aluminum constrution, I also found it to be harder to set than a steel fluke anchor but once it did set it held very well. I keep the Fortress as a spare on the boat since it comes apart and stores nicely. The boat came with a steel plow anchor which never stayed set in the muddy bottoms of the Chesapeake. |
|
| Author: | Family knot [ Wed Feb 05, 2014 4:00 pm ] |
| Post subject: | Re: Is a danforth anchor samething as a Fortress anchor? |
noexcuses wrote: I had a Fortress anchor on my 298 for a couple of years, it will not self deploy either. Due to its light weight aluminum constrution, I also found it to be harder to set than a steel fluke anchor but once it did set it held very well. I keep the Fortress as a spare on the boat since it comes apart and stores nicely. The boat came with a steel plow anchor which never stayed set in the muddy bottoms of the Chesapeake. Thank you everyone for the feedback. What do use now as a bow anchor? |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|