| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| How to gain access to V378 Anchor Well https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=12622 |
Page 1 of 1 |
| Author: | Pilotpak [ Sun Feb 09, 2014 5:12 am ] |
| Post subject: | How to gain access to V378 Anchor Well |
Hi, The Muir chain counter on my new (to me) 2006 378 is showing a SENSOR error. I opened the access port and found a corroded wire, which when reattached, caused the SENSOR error to go away, but the counter does not count the rode. I have calibrated to no avail. Muir manual says to check alignment of the magnet. Does anyone know how to gain access to the anchor locker on the 378 - I guess it's behind the main berth mirror, but I can't see how to remove the mirror.? |
|
| Author: | jnizi [ Sun Feb 09, 2014 8:45 am ] |
| Post subject: | Re: How to gain access to V378 Anchor Well |
The mirror should be cleated and will lift straight up. Behind that should be an access hatch. |
|
| Author: | Pilotpak [ Mon Feb 10, 2014 3:40 pm ] |
| Post subject: | Re: How to gain access to V378 Anchor Well |
Thanks Jnizi, I'll give it a go when I'm at the boat this weekend. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|