| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Vista - Old Style Lewmar Hatch Part Needed https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=12751 |
Page 1 of 1 |
| Author: | 298VISTA2000 [ Thu Apr 03, 2014 10:32 am ] |
| Post subject: | Vista - Old Style Lewmar Hatch Part Needed |
I have a 2000 298 Vista and I am looking for these parts that the old style Lewmar hatch hinge connects to. I know a lot of forum members have had to replace the entire hatch so I was hoping someone kept these parts. I will even pay you for them. Thanks. 
|
|
| Author: | boater50 [ Thu Apr 03, 2014 2:18 pm ] |
| Post subject: | Re: Vista - Old Style Lewmar Hatch Part Needed |
Doh! I almost had those for ya.......I just repaired my same hatch since any new one is too large for the opening and I don't want to cut it larger, nor spend 1000.00 to have someone else do it. Hopefully the hatch will no longer leak once reinstalled. Sorry for the long answer, and if anything should change I'm happy to toss those hinge pins in an envelope and mail them to you. Have you tried Hatchmasters in So. Norwalk, CT? I was there a couple weeks ago to see if they could fix my hatch- they couldn't, but maybe they can get those parts for you, or have some spares? www.selectplastics.com. They are very nice, extremely professional and honest. Good luck! Steve |
|
| Author: | 298VISTA2000 [ Fri Apr 04, 2014 8:12 am ] |
| Post subject: | Re: Vista - Old Style Lewmar Hatch Part Needed |
boater50 wrote: Doh! I almost had those for ya.......I just repaired my same hatch since any new one is too large for the opening and I don't want to cut it larger, nor spend 1000.00 to have someone else do it. Hopefully the hatch will no longer leak once reinstalled. Sorry for the long answer, and if anything should change I'm happy to toss those hinge pins in an envelope and mail them to you. Have you tried Hatchmasters in So. Norwalk, CT? I was there a couple weeks ago to see if they could fix my hatch- they couldn't, but maybe they can get those parts for you, or have some spares? http://www.selectplastics.com. They are very nice, extremely professional and honest. Good luck! Steve Thanks for the tip and I will check to see if those companies have them. Also, there is a thread on here where one of the members installed the larger hatch themselves and it looked pretty easy to increase the size of the opening (but then again, the DIY shows on TV make everything look easy too). |
|
| Author: | boater50 [ Fri Apr 04, 2014 8:20 am ] |
| Post subject: | Re: Vista - Old Style Lewmar Hatch Part Needed |
Yes, enlarging a hole by a 1/4" isn't too big a deal-- I would do it if I were replacing, say a window in my house (done that), but cutting into fiberglass (my baby!) for me, is a little nerve racking. Plus, I had a little bit of rotted balsa-core at the edge of the opening from leaking fasteners, so I needed to epoxy it first, plus I'm a real DIY-er who likes to "refurbish" things- heck I even reuse nails sometimes when I do projects around the house! I made an outdrive stand out of some old 2x3's I reclaimed from my kitchen renovation a couple years ago! So that's my long answer. Oh, try one more place up here in Connecticut……www.affordablemarine.com. They sell used boat parts, maybe they'll have these hinge pins……. good luck! |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|