| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| cockpit table with cherry venner plywood? https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=12761 |
Page 1 of 1 |
| Author: | Family knot [ Tue Apr 08, 2014 2:01 pm ] |
| Post subject: | cockpit table with cherry venner plywood? |
Do you think a 3/4" piece of cherry veneer plywood polyurethaned would survive the marine conditions? My table would only be out 10-25% of the time we are boating. Just while we are eating. If it rains, it is under canvas. My first concern is warping... |
|
| Author: | NiagaraChillin [ Tue Apr 08, 2014 3:47 pm ] |
| Post subject: | Re: cockpit table with cherry venner plywood? |
I think it would be fine, especially since you say it will be out for eating on and under the canvas. Are you making it yourself, or buying it pre-made? I made this out of pine and stained it walnut, then varnished it. It has held up 2 seasons so far. 
|
|
| Author: | babbot1 [ Tue Apr 08, 2014 3:56 pm ] |
| Post subject: | Re: cockpit table with cherry venner plywood? |
I would think it would be okay for a quite a few years as well. I had a piece of birch plywood as a table on a grille outside and uncovered. It was leftover so I just stuck it on there. It lasted for a couple years even without any urethane on the edges. I would just put a good amount of urethane on the edges to seal the plywood and your all set. NiagaraChillin, love the cup holder feature.... |
|
| Author: | NiagaraChillin [ Tue Apr 08, 2014 4:13 pm ] |
| Post subject: | Re: cockpit table with cherry venner plywood? |
babbot1 wrote: NiagaraChillin, love the cup holder feature.... Thanks! If I remember right, the factory table was about half the size and didn't have any cupholders. Dealbreaker right there 
|
|
| Author: | psusound [ Wed Apr 09, 2014 4:39 pm ] |
| Post subject: | Re: cockpit table with cherry venner plywood? |
Try http://wexfordwoodworkings.com/index.html They did an awesome Cherry Wood table for me cheap! |
|
| Author: | Family knot [ Wed Apr 30, 2014 7:04 pm ] |
| Post subject: | Re: cockpit table with cherry venner plywood? |
I ended up going with a custom cherry wood table that fits the exact dimensions of my current table. It's rectangular in shape and approx 24"x34"x.75". A furniture store that does custom work quoted $600. I found a local wood worker and worked with him directly. He's charging me $300. Once I get it, I'll post a photo. |
|
| Author: | Family knot [ Wed May 28, 2014 6:29 pm ] |
| Post subject: | Re: cockpit table with cherry venner plywood? |
 Here's my final product. |
|
| Author: | TFD2001 [ Thu May 29, 2014 6:00 am ] |
| Post subject: | Re: cockpit table with cherry venner plywood? |
Family knot wrote: Here's my final product. Nice! |
|
| Author: | NiagaraChillin [ Thu May 29, 2014 7:42 am ] |
| Post subject: | Re: cockpit table with cherry venner plywood? |
Wow! That looks great. |
|
| Author: | Bliss36 [ Thu May 29, 2014 11:39 am ] |
| Post subject: | Re: cockpit table with cherry venner plywood? |
Wow that's sharp!! I'm thinking he could sell a bunch of those tables at that price if he wanted to! |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|