|
Basically there are 2 ways the wheel can be mounted: splined shaft or a tapered shaft with a woodruff key. For the former you can use a puller. For the latter loosen the nut holding on the wheel unscrew it to the end of the threads. The take a block of wood and a hammer. Put the block of wood over the nut and rap it with the hammer, that will break ine grip of the taper. Look for the woodruff key it fits in a slot in the shaft and may fall out. Use grease when re assembling.
_________________
88 Four Winns 200 Horizon
4.3 OMC Cobra-4bbl
2002 Walker Bay 10/2012 Suzuki 2.5
2008 Walker Bay 8
1998 Jeep Grand Cherokee 4.0/Selectrac
2007 Jeep Grand Cherokee 5.7 Hemi/Quadradrive II
|
Login
FAQ
Search
