| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Pulling the dash board behind steering wheel https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=13051 |
Page 1 of 1 |
| Author: | dobryan [ Thu Jun 19, 2014 8:30 am ] |
| Post subject: | Pulling the dash board behind steering wheel |
Any tips to taking the steering wheel off so I can pull the dashboard to replace the fish finder? |
|
| Author: | LouC [ Thu Jun 19, 2014 9:05 am ] |
| Post subject: | Re: Pulling the dash board behind steering wheel |
Basically there are 2 ways the wheel can be mounted: splined shaft or a tapered shaft with a woodruff key. For the former you can use a puller. For the latter loosen the nut holding on the wheel unscrew it to the end of the threads. The take a block of wood and a hammer. Put the block of wood over the nut and rap it with the hammer, that will break ine grip of the taper. Look for the woodruff key it fits in a slot in the shaft and may fall out. Use grease when re assembling. |
|
| Author: | Graham R [ Thu Jun 19, 2014 11:10 am ] |
| Post subject: | Re: Pulling the dash board behind steering wheel |
You may well be able to remove the wheel from the hub; they are held together usually with 6 countersunk allen bolts. Both my previous Sundowners and my current Vista had that sort of attachment. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|