since she's still down , I decided to do some things on the boat. did some fiberglass work in the anchor storage put on the new vista decals and made a bracket for my grill .I couldn't see paying over a hundred bucks on a bracket so i made my own
| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| dowm time https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=13160 |
Page 1 of 1 |
| Author: | crossram [ Sat Jul 12, 2014 11:55 pm ] |
| Post subject: | dowm time |
since she's still down , I decided to do some things on the boat. did some fiberglass work in the anchor storage put on the new vista decals and made a bracket for my grill .I couldn't see paying over a hundred bucks on a bracket so i made my own
|
|
| Author: | LVChris [ Mon Jul 14, 2014 12:10 am ] |
| Post subject: | Re: dowm time |
I really like that bracket, it looks a lot sturdier than the ones you buy. Any details on how you made it? |
|
| Author: | JeffLW [ Mon Jul 14, 2014 7:13 am ] |
| Post subject: | Re: dowm time |
LOL Dish Network?  I like it!
|
|
| Author: | crossram [ Mon Jul 14, 2014 7:48 am ] |
| Post subject: | Re: dowm time |
jeff you are close driect tv  . just had to make a plate to attatch the bracket to the grill. used thumb screws to attatch it to the cleat . cut a slot out of the tubeing where it slids into the bracket at the boat to go over the cleat ill post some pics after i get home tonight
|
|
| Author: | LVChris [ Mon Jul 14, 2014 8:58 am ] |
| Post subject: | Re: dowm time |
I thought it looked like a satellite mount. That's awesome. . |
|
| Author: | JeffLW [ Mon Jul 14, 2014 9:24 am ] |
| Post subject: | Re: dowm time |
They also make great flag pole holders. I like that you attached it to a cleat and no holes were drilled. Definitley need pics of that. |
|
| Author: | Jafo4U [ Mon Jul 14, 2014 10:31 pm ] |
| Post subject: | Re: dowm time |
That is a great looking mount. |
|
| Author: | crossram [ Mon Jul 14, 2014 10:35 pm ] |
| Post subject: | Re: dowm time |
used one of the pinch clamps to mount to cleat. 2 thumb screws hold it to cleat , they go between the cleat and the boat . cut out a slot in the pole to slide over the cleat. still need to clean up the cut , then im going to take a piece of vac tubing an cut a slit and wrap it around the cut out drilled a hole thru both clamp and pipe to put a pin thru to keep it from turning, I used the 4 flat bolts from the dish to mount my plate to grill with the nut towards the grill need to get 4 more thumb nuts so i can remove the grill from the mount for storage    
|
|
| Author: | jrboater [ Tue Jul 15, 2014 12:17 pm ] |
| Post subject: | Re: dowm time |
Are we related? That looks exactly like something I would do, in fact I kept the same bracketry when I threw out my dish 6 months ago. John 
|
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|