www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

Head Faucet
https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=13299
Page 1 of 1

Author:  firecadet613 [ Tue Aug 05, 2014 9:02 am ]
Post subject:  Head Faucet

Does anyone know the manufacturer of this faucet?

Image

I need to replace the rubber washer on the bottom of this stem...but unfortunately it is not held in by a screw.

Image

Image

Leave it to a ten year old to keep cranking it off...and wonder why the cold water isn't coming on?

Author:  rpengr [ Tue Aug 05, 2014 9:26 am ]
Post subject:  Re: Head Faucet

I don't know who made that faucet, but the setup looks the same as many bathroom valves. The Rubber washer just snaps over that post. You can get a faucet washer assortment from Home Depot or Walmart, or you can get the washer from a plumbing supply store. Just pull the old washer off, and push the new one on using a small socket or similar to help push it over the post.

Author:  firecadet613 [ Tue Aug 05, 2014 9:32 am ]
Post subject:  Re: Head Faucet

I didn't try to pull it off, but that makes sense. I'm used to seeing a screw there to remove and then have it come off.

Author:  Thalasso [ Tue Aug 05, 2014 11:19 am ]
Post subject:  Re: Head Faucet

Most likely these people

Scandvik Marine Inc. - Faucets-Showers
www.scandvik.com/index.cfm/method/Shopp ... s/id/3.htm

Author:  cougarcruiser [ Tue Aug 05, 2014 11:24 am ]
Post subject:  Re: Head Faucet

JSimon and I both changed ours to this

http://yachtsupplydepot.com/cabin-galle ... _9578.html

Author:  firecadet613 [ Tue Aug 05, 2014 11:27 am ]
Post subject:  Re: Head Faucet

Nice! Although that won't help this leak. Does that one still have the shut off on it, and do you have a picture of how it looked against the sink?

Author:  cougarcruiser [ Tue Aug 05, 2014 8:20 pm ]
Post subject:  Re: Head Faucet

Jsimon posted this pic. It does have an on/off


viewtopic.php?f=6&t=9406&p=90407&hilit=Faucet#p90407

Author:  jgreve75 [ Wed Aug 06, 2014 3:47 am ]
Post subject:  Re: Head Faucet

www.defender.com has those fixtures listed... I had to replace the nozzle last year and was able to find one there. Not sure if they have just the replacement valve stem though... :(

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/