www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
2000 268 https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=13523 |
Page 1 of 1 |
Author: | shuman [ Thu Sep 25, 2014 6:39 pm ] |
Post subject: | 2000 268 |
Want to install a larger cooler in the existing spot is that bottom plate adjustable to fit a wider cooler in ? |
Author: | Cap'n Morgan [ Fri Sep 26, 2014 6:02 am ] |
Post subject: | Re: 2000 268 |
shuman wrote: Want to install a larger cooler in the existing spot is that bottom plate adjustable to fit a wider cooler in ? No, it's not adjustable. You would have to make one yourself out of starboard. Any taller than existing cooler, and you may not be able to open it without removing it. Strap a large cooler on the swimplatform, and keep the std. cooler in the cockpit if you need more cooler space. |
Author: | shuman [ Fri Sep 26, 2014 10:48 am ] |
Post subject: | Re: 2000 268 |
Thanks however swim grid needs to be clear as dinghy is stored there on Davits Re opening the lid I just remove hinges and slide lid off . Thanks anyway Shuman |
Author: | Surface Interval [ Fri Sep 26, 2014 8:23 pm ] |
Post subject: | Re: 2000 268 |
Shuman, can you post a couple pix of your davit and dinghy arrangement? I have a 268 and I just ratchet strap my dinghy on the swim platform. |
Author: | shuman [ Fri Oct 03, 2014 9:34 pm ] |
Post subject: | Re: 2000 268 |
sorry however nothing fancy just davit male and female one edge of grid other on dingy hook them up and pull dingy to desired spot we are on a lake and use the grid do not wish to clog grid with the cooler with this system deck is clear and at anchor we lower dingy in the water to use the ladder. Thanks shuman |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |