www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

Vista part number search - aft sunpad filler cushion base
https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=13725		 Page 1 of 1
Author:  vista_sg [ Wed Jan 14, 2015 3:24 am ]
Post subject:  Vista part number search - aft sunpad filler cushion base
Guys, looking for some help in finding a part number please. My boat has the rear seat configuration shown below, and whilst I have the filler cushion to turn it into a sunpad I do not have the hard base to support the cushion. I have looked through the FW online parts catalogue but cannot see where to find this part, and the seats config shown online seems like a different option/model than mine.
Can anyone help me find the part number please? I would rather have the original part than make a base myself.

Thanks!

My seats:
Image

Rear seat assembly with base shown:
Image
Author:  298VISTA2000 [ Thu Jan 15, 2015 8:20 am ]
Post subject:  Re: Vista part number search - aft sunpad filler cushion bas
I have a 2000 Vista 298 and on my boat, the hard base that that filler sunpad sits on is actually the cockpit table. If you don't have it on hand, look underneath the aft cockpit cushion and it stores underneath there. I don't know the year of your Vista so the table design might be different.
Author:  ric [ Thu Jan 15, 2015 10:01 am ]
Post subject:  Re: Vista part number search - aft sunpad filler cushion bas
Buy a piece of marine grade plywood, cut it to size, and paint it white.
Author:  vista_sg [ Sun Jan 18, 2015 9:59 pm ]
Post subject:  Re: Vista part number search - aft sunpad filler cushion bas
Thanks guys. On the 268 the filler is a separate part that slots under the aft seats, the table is a different size/shape altogether.

Ric - making my own piece is of course an option, however I would like as much as possible to keep it OEM if I can :D
Author:  jimbabwe [ Sun Jan 18, 2015 10:58 pm ]
Post subject:  Re: Vista part number search - aft sunpad filler cushion bas
Have your hin number ready and go to fourwinns.com/customerservice and look at right side of page. It says parts catalog,click on that and follow the instructions. It took me a while to find what I needed but if they make it is there.
Author:  bheard1969 [ Mon Jan 19, 2015 2:49 pm ]
Post subject:  Re: Vista part number search - aft sunpad filler cushion bas
On my 268 the table is used for the base for the infill cushion. Just used a shorter stand.
Author:  Surface Interval [ Mon Jan 19, 2015 3:12 pm ]
Post subject:  Re: Vista part number search - aft sunpad filler cushion bas
Some time during the 2002 model year Four Winns changed the cockpit seating. The earlier style is what the original poster showed. Notice the ledge under the seat base's forward edge to support the fill-in panel and cushion. Later in the 2002 model year Four Winns went to the short post for the somewhat tear-drop shaped table and cushion. Another change is the split helm seat with a flip up bolster for the captain.
Author:  ric [ Mon Jan 19, 2015 9:02 pm ]
Post subject:  Re: Vista part number search - aft sunpad filler cushion bas
OEM is a piece of plywood
Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/