www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
Transom exhaust pipes https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=13879 |
Page 1 of 1 |
Author: | Oldsmoduck [ Fri Apr 03, 2015 9:01 am ] |
Post subject: | Transom exhaust pipes |
Hi Guys, been grinding hard on this project boat.. running into a few questionable items and a question here about the pipes that the risers bolt to where it routes the exhaust down to the transom. The Y-pipe i guess. do these typically rot out or need replacement like the manifolds and risers? boat is a 1999 328 with big blocks. Thanks! |
Author: | Surface Interval [ Fri Apr 03, 2015 11:32 am ] |
Post subject: | Re: Transom exhaust pipes |
The y pipes I have seen are aluminum. I think the inside is anodized. Its still possible that an aluminum part can corrode. If the y pipe corrodes through you would have a direct leak in to the bilge. If you are in salt water I would recommend that the inside be looked at occasionally. The boat will need to be out of the water and it might be a good thing to check when inspecting or changing exhaust risers. |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |