| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Rubber hold down cord for cooler https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=13989 |
Page 1 of 1 |
| Author: | Bwalton [ Thu May 07, 2015 8:33 pm ] |
| Post subject: | Rubber hold down cord for cooler |
I have a 2009 278v that i am looking to find a replacement black rubber hold down cord for the cooler . The cord is black rubber about 6 inches long with a hook and ball on each end. Thanks |
|
| Author: | babbot1 [ Fri May 08, 2015 7:48 am ] |
| Post subject: | Re: Rubber hold down cord for cooler |
I would say just go down to the hardware store and find a regular bungy cord with the hook similar size. Cut one end to length but a little longer and tie a knot after you put it through the hole in the cooler spot. If you can find a black one or 2 of the same color and replace them both no one will know the difference. |
|
| Author: | Rick2752 [ Fri May 08, 2015 1:40 pm ] |
| Post subject: | Re: Rubber hold down cord for cooler |
Bass pro shop has the right ones. I replaced one and the other one broke immediately after. So might as well buy both. I think they were like 6 or 8 dollars each. I don't really know if they are needed. Though. |
|
| Author: | It's About Time [ Sat May 09, 2015 3:25 pm ] |
| Post subject: | Re: Rubber hold down cord for cooler |
Hey there.. I have a 2001 268 Vista and I replaced the cooler hold down cords by going to the Four Winns website and they mailed them right to my house. I also ordered some other stuff with them, but it was real easy. Just go to the site and click on customer service. Then you can look up your model and year and find it through there. I hope that helps! |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|