| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| 268 vista table leg https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=14885 |
Page 1 of 1 |
| Author: | Pipedreams [ Wed Jun 01, 2016 8:03 pm ] |
| Post subject: | 268 vista table leg |
Iam looking for a replacement table leg for the table in the cabin on a 2000 268 any ideas were to buy one? |
|
| Author: | deafwish [ Thu Jun 02, 2016 3:11 am ] |
| Post subject: | Re: 268 vista table leg |
Springfield manufacture many universal table pedestals, designed specifically for boats. |
|
| Author: | jayjay4735 [ Mon Jun 06, 2016 2:26 pm ] |
| Post subject: | Re: 268 vista table leg |
You should be able to order this through a four winns dealer. Looks like the part you want is 030-0872. |
|
| Author: | Surface Interval [ Mon Jun 06, 2016 8:30 pm ] |
| Post subject: | Re: 268 vista table leg |
Is this pedestal the threaded base type that screws into a floor fitting, or an aluminum post about 3 inches in diameter with tapered ends. According to the Four Winns website parts catalog, it appears that the post might be the threaded base type. That P# is 030-0484, or SL1906PTM25-1 which shows "no longer available" on the Four Winns site. I see one of these on ebay. http://www.ebay.com/itm/Attwood-Table-L ... WQ&vxp=mtr If it is the 3 inch diameter alumunum tube with tapered ends, the part number is 030-0105 or ALM# Z76-9071VEL28-2. Ebay has this Stainless Steel tube that appears to be the same size. http://www.ebay.com/itm/Zwaardvis-Z76-8 ... yf&vxp=mtr Or you might be able to get your your dealer to order this one if it is what you need. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|