| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| 2007 278 Vista Aft Cabin Portal Screen Installation https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=14912 |
Page 1 of 1 |
| Author: | TheDanceII [ Mon Jun 13, 2016 12:37 pm ] |
| Post subject: | 2007 278 Vista Aft Cabin Portal Screen Installation |
I am sure this will turn out to be a dumb question but how do you install the screen in the aft cabin window that is under the captains seats? The screen is square and matches the dimensions of the window. It will not fit from the outside. There is nothing to hold it in place from the inside that I can figure out. The window latches won't tighten enough to hold it in place. Thanks |
|
| Author: | Guinnydog [ Sun Jun 26, 2016 9:53 pm ] |
| Post subject: | Re: 2007 278 Vista Aft Cabin Portal Screen Installation |
Pictures help. On mine, the screen is permanently mounted to the window opening, and when you loosing the turnbuckles, the plastic window swings up and away from the screen/opening (done from inside cabin). |
|
| Author: | TheDanceII [ Mon Jun 27, 2016 7:47 am ] |
| Post subject: | Re: 2007 278 Vista Aft Cabin Portal Screen Installation |
I finally figured it out yesterday afternoon. It should have been installed between the rubber seal and the window mount so that it stays there all the time. I got it back in. Thanks |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|