| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Replacing transom anode on 2003 348 vista https://www.smwebhead.com/phpBB3/viewtopic.php?f=6&t=1523 |
Page 1 of 1 |
| Author: | marylander [ Wed Feb 06, 2008 5:02 pm ] |
| Post subject: | Replacing transom anode on 2003 348 vista |
I have to replace the large zinc anode on the transom of my 2003 348 Vista. The current anode has 4 Philips-head bolts with the nuts on the inside of the transom (how nuts!!!). The replacement anode I received from FourWinns has 2 bolts and will be bolted on the outside of the transom, making replacement much easier. Of course, the bolt holes for the replacement do not lineup with the current 4 bolt holes. Question: Has anyone tackled this replacement before? Any recommendations would be appreciated. There is very little room inside the engine compartment to perform this work so I only want to do it once. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|